Ryobi P300 English Manual - Page 8
Features, Assembly - nailer
View all Ryobi P300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
FEATURES KNOW YOUR CORDLESS NAILER/STAPLER See Figure 1. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. SWITCH TRIGGER The switch trigger is conveniently located under the handle. Pulling the switch trigger will fire one brad or staple at a time. SAFETY INTERLOCK The safety interlock prevents the nailer/stapler from turning on accidentally. Push the activation foot of the nailer/ stapler down flush to the workpiece to disengage the safety interlock. DEPTH ADJUSTMENT KNOB Use the depth adjustment knob to control the depth of the staple or brad. ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the tool and accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Nailer/Stapler 3/4 in. and 1-1/4 in. Brads 5/16 in. and 9/16 in. Staples Operator's Manual WARNING: If any parts are damaged or missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.