Ryobi P421 Trilingual Manual - Page 10
Operation
View all Ryobi P421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
OPERATION TO INSTALL BATTERY PACK See Figure 3. Place the battery pack on the tool. Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool before beginning operation. TO REMOVE BATTERY PACK See Figure 3. Depress the latches on the side of battery pack. Remove the battery pack from the tool. WARNING: Battery products are always in operating condition. Therefore, the switch should always be locked when not in use or carrying at your side. LOCK-OFF BUTTON See Figure 4. The lock-off button is located on the handle above the switch trigger. You must depress the lock-off button in order to pull the switch trigger. The lock resets each time the trigger is released. SWITCH TRIGGER See Figure 4. To turn the grinder ON, depress and hold lock-off button, then depress the switch trigger. To turn it OFF, release the switch trigger. SWITCH TRIGGER BATTERY PACK LOCK-OFF BUTTON Fig. 3 Fig. 4 10