Ryobi P500 English Manual - Page 11
Operation
View all Ryobi P500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. depress latches to remove battery pack WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. APPLICATIONS You may use this tool for the following purposes: to install Cutting all types of wood products (lumber, plywood, paneling) Cross Cutting/Rip Cutting BATTERY PACK Fig. 4 Bevel Cutting Pocket Cutting 13 CAUTION: This product will accept Ryobi One+ 18 V lithium-ion When placing battery pack in the tool, be sure raised battery packs and Ryobi One+ 18 V nickel-cadmium battery rib on battery pack aligns with the bottom of the tool packs. and latches into place properly. Improper installa- For complete charging instructions, refer to the Operator's tion of the battery pack can cause damage to internal Manual for the battery packs and chargers listed in the components. General Safety Rules. REMOVING THE BATTERY PACK installing the BATTERY PACK See Figure 4. See Figure 4. n Locate the latches on the side of the battery pack and n Place the battery pack in the saw. Align the raised rib depress them to release the battery pack from the saw. on the battery pack with the groove inside the saw, then n Remove battery pack from your saw. slide the battery pack into the saw. n Make sure the latches on each side of your battery pack snap into place and the battery pack is secured in the saw before beginning operation. 11