Ryobi P882 User Manual 3 - Page 9
Assembly
View all Ryobi P882 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ASSEMBLY UNPACKING This product requires assembly. Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Pole Pruner Blade Blade Cover Hex Key Operator's Manual Warranty Registration Card WARNING: If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to do so could result in possible serious personal injury. INSTALLING/REMOVING THE BLADE See Figures 2 - 3. INSTALLING THE BLADE: Remove the battery pack from the pole pruner. Remove the hex key from the storage area. Place the hex key in the access hole and loosen the blade retaining screw. Install the blade into the mounting clamp. NOTE: Make sure the mounting clamp pin is positioned correctly in the positioning pin hole of the blade. If not positioned correctly the mounting clamp will not hold the blade securely. Tighten the blade retaining screw securely with the hex key. Return the hex key to the storage area. Reinstall the battery pack in the tool. REMOVING THE BLADE Remove the battery pack from the pole pruner. Remove the hex key from the storage area. Place the hex key in access hole and remove the blade retaining screw. Remove the blade from the unit, making sure the blade clears the mounting clamp pin. Reinstall the battery pack in the tool. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. HEX KEY WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. WARNING: Blades are sharp. When installing and removing the blade, wear non-slip, heavy-duty protective gloves. Do not place your hand or fingers in any position where they could get cut. NEVER touch the blade or service the unit with the battery pack installed. HEX KEY STORAGE MOUNTING CLAMP PIN POSITIONING PIN HOLE 9 Fig. 2 MOUNTING CLAMP Fig. 3