Samsung 240T User Manual (ENGLISH) - Page 27

Portuguese Italiano Español Deutsch Français English Appendix Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn't equal to the standard signal mode, adjust the mode with referring to the Videocard user guide because the screen might not display or only the power LED might be on. For the display modes listed below, the screen image has been optimized during manufacture. Table 7. Preset timing modes Mode Resolution Horizontal Frequency (kHz) VGA SVGA XGA SXGA UXGA (Analog only) WUXGA (Analog/240T only) 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1600 x 1200 1920 x 1200 31.469 31.469 37.500 43.269 46.875 53.674 48.363 60.023 68.677 63.981 79.976 75.000 75.000 1600 x 1200 / 1920 x 1200 Mode change function Vertical Frequency (Hz) 70.087 59.940 75.000 85.008 75.000 85.061 60.004 75.029 84.997 60.020 75.025 60.000 Pixel Clock Frequency (MHz) 28.322 25.175 31.500 36.000 49.500 56.250 65.000 78.750 94.500 108.000 135.000 162.000 Sync Polarity (H/V) 60.000 193.156 +/-,+/- The recommended mode of SyncMaster 240T is 1920 x 1200, however you may prefer 1600 x 1200 to 1920 x 1200. Then, please use mode change function for optimal screen display. 1. Press "menu" button on the Monitor front. 2. Choose "information" menu by using +/- key 3. Press "menu" button 7 times continuously 4. Then, the mode change funcion operates 5. If you want to revert to the original mode, then do the 1-3 procedure again. English 25