Samsung 245T-BLACK User Guide - Page 45

- Not available in MagicBright™ mode of Dynamic CR. MENU ! , ! ! , ! ! , ! ! , ! If you adjust picture using Custom function, MagicBright™ will turn to Custom mode. Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. - Available in PC mode only 1) Coarse : Adjust the screen so that all vertical lines (noise) on the screen are removed. Then, use the horizontal position adjustment menu to move the screen to the center, as the screen position may change after the noise has been removed. 2) Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). 3) Sharpness : Adjust the Sharpness. - Not available in MagicBright™ mode of Dynamic CR. 4) H-Position : Adjusts the screen location horizontally. 5) V-Position : Adjusts the screen location vertically. MENU ! , Coarse Fine Sharpness Image Lock H-Position V-Position ! ! , ! ! , ! ! , ! Auto Adjustment The values of Fine, Coarse, position are adjusted automatically. By changing the resolution in the control panel, auto function is performed. - Available in PC mode only MENU ! , ! ! , ! You can switch the Size. Size 1) Wide 2) 4:3 MENU ! , ! ! , ! ! , ! When the PIP is on, you can adjust the PIP screen setting. 1) Contrast : Adjusts the Contrast of the PIP window on the screen. 2) Brightness : Adjusts the Brightness of the PIP window on the screen. 3) Sharpness : Adjusts the Sharpness of the PIP window on the screen 4) Color : Adjusts the Color of the PIP window on the screen 5) Tint : Adds a natural tone to the PIP window. - Available in AV/S-Video Mode Only MENU ! , Contrast Bightness Sharpness PIP Picture Color Tint ! ! , ! ! , ! ! , ! Picture (AV/S-Video/Component/HDMI)