Samsung 400DXn User Manual (user Manual) (ver.1.0) (English)
Samsung 400DXn - SyncMaster - 40" LCD Flat Panel Display Manual
UPC - 729507801308
View all Samsung 400DXn manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung 400DXn manual content summary:
- Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 1
SyncMaster 400DXn / 460DXn Install Programs PDF Manuals Registration Model Select Language Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix © 2007 Samsung Electronics Co., Ltd. All rights reserved. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 2
Instructions Notational Power Installation Clean Others Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications shock Power When not used for an extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 3
not disconnect the power cord while using the LCD Display. z A surge may be caused by the separation and may damage the LCD Display. Do not use the power cord when Installation Be sure to contact an authorized the Service Center, when installing your LCD Display in a location with heavy dust, high - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 4
Failure to do so may cause serious damage to your LCD Display. Place your LCD Display in a location with low humidity and a minimum of dust. z Failure to do so may cause electric shock or fire inside the LCD Display. Do not drop the LCD Display when moving it. z This may cause damage to the product - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 5
cause suffocation if children play with it. Clean When cleaning the LCD Display case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly onto the LCD Display. z This may cause damage, electric shock or fire. Use the recommended - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 6
, avoid operating the LCD Display near water or outdoors where the LCD Display could be exposed to snow or rain. If the LCD Display is dropped or the casing is damaged, turn the LCD Display off and unplug the power cord. Then contact the Service Center. z The LCD Display may malfunction, causing - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 7
water containers, chemical products or small metal objects on the LCD Display. z This may cause a malfunction, electric shock or fire. z If a foreign substance enters the LCD Display , unplug the power cord and contact the Service Center. Keep the product away from combustible chemical sprays or - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 8
Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. z Change the mode to energy saving mode or set a screensaver to a changing picture when away from the LCD Display When moving the LCD Display , turn off and unplug the power cord. Make - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 9
fall, causing injury or even fatality. When removing batteries from the remote control, be careful that they are not swallowed by children. keep the batteries If the batteries are swallowed, see a doctor immediately. When replacing batteries, place the batteries in the correct +/polarity position as - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 10
recycling center or to a store selling the same type of the battery or rechargeable battery. © 1995~2007 SAMSUNG. ALL Rights Reserved - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 11
, contact your dealer. Contact a local dealer to buy optional items. Note • This stand is not for the Floor Standing Type. Manuals LCD Display Quick Setup Guide Warranty Card User's Guide, MDC Software, (Not available in all locations) MagicNet Software Cables D-Sub Cable Other Power Cord - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 12
Remote Control Batteries (AAA X 2) (Not available in all locations) Cover-Hole BNC to RCA Adaptor Jack Semi Stand USB Holder & Screw (1EA) Sold separately Screw: 4 EA Wall Mount KIT Speaker Set BNC Cable LAN Cable Front DVI Cable Your LCD Display 1) MENU Opens the on-screen menu and - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 13
mode by blinking green. 10) Remote Control Sensor Aim the remote control towards this spot on the LCD Display. Note • See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 14
[ | ] / OFF [O] Switches the LCD Display On/Off. 2) POWER IN The power cord plugs into the LCD Display and the wall plug. 3) REMOTE OUT/IN You can use a wired remote control by connecting it to your monitor. 4) RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port 5) DVI / PC - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 15
the LCD Display for further information regarding cable connections. Remote Control Note • The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency. 1. ON / OFF 2. MAGICNET - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 16
both the remote control and the LCD Display except for the Power and LOCK buttons. 5) MagicNet buttons Used for MagicNet. • Alphanumeric: services via teletext. - This fuction does not work for this monitor. 10) MENU Opens the on-screen menu and exits from the menu screen or closes the screen - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 17
screen display automatically in PC mode. By changing the resolution in the control panel, auto function is performed. 14) ENTER/PRE-CH Returns to the immediately previous channel. - This fuction does not work for this monitor is displayed at the bottom centre of the screen. The LCD Display has - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 18
window signal. 28) SWAP Swaps the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window. 29) SIZE Switches the PIP Picture Size. 30) REW Rewind 31) STOP Stop 32) PLAY / PAUSE - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 19
SyncMaster 400DXn Mechanical Layout | Monitor Head | Stand | Speaker | Installation VESA Bracket | Wall Bracket Installation 1. Mechanical Layout NETWORK MODEL SIZE PROTECTION GLASS + NETWORK MODEL SIZE Weight z Set { 25.0 kg (with Basic Stand) { 30.5 kg (with Basic Stand / option protection - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 20
{ 28.5 kg (with Basic Stand) { 34.0 kg (with Basic Stand / option protection glass) 2. Monitor Head NETWORK MODEL SIZE PROTECTION GLASS + NETWORK MODEL SIZE 3. Stand - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 21
4. Speaker - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 22
order. After your order is placed, installation professionals will visit you and install the bracket. z At least 2 persons are needed in order to move the LCD Monitor. z Samsung is not responsible for any product damage or any injury caused by installation at customer's discretion - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 23
Installation z Contact a technician for installing the wall bracket. z Samsung Electronics is not responsible for any damages to the product or hinges(left and right). Use the correct one. Before drilling into the wall, check if the length between the two locking holes at the back of the product - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 24
Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 25
it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A. Monitor B. Wall Bracket C. Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2°before installing it on the wall. 1. Fix the product to the wall - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 26
SyncMaster 460DXn Mechanical Layout | Monitor Head | Stand | Speaker | Installation VESA Bracket | Wall Bracket Installation 1. Mechanical Layout NETWORK MODEL SIZE PROTECTION GLASS + NETWORK MODEL SIZE Weight z Set { 31.30 kg (with Basic Stand) { 36.1 kg (with Basic Stand / option protection - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 27
{ 37.6 kg (with Basic Stand) { 42.4 kg (with Basic Stand / option protection glass) 2. Monitor Head NETWORK MODEL SIZE PROTECTION GLASS + NETWORK MODEL SIZE 3. Stand - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 28
4. Speaker - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 29
order. After your order is placed, installation professionals will visit you and install the bracket. z At least 2 persons are needed in order to move the LCD Monitor. z Samsung is not responsible for any product damage or any injury caused by installation at customer's discretion - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 30
Installation z Contact a technician for installing the wall bracket. z Samsung Electronics is not responsible for any damages to the product or hinges(left and right). Use the correct one. Before drilling into the wall, check if the length between the two locking holes at the back of the product - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 31
Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 32
it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A. Monitor B. Wall Bracket C. Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2°before installing it on the wall. 1. Fix the product to the wall - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 33
Select Language Main Page Model Safety Instructions Introduction Connections Installing the Stand KIT Connecting the LCD Display Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix The color and appearance of the product may vary depending on the model - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 34
information on connecting AV input devices, refer to the User Controls under Adjusting Your LCD Display. Connecting a Computer 1) Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Trun on the power switch. 2) There are 3 ways to connect the D-sub to - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 35
your computer and the LCD Display. Note • The DVI cable or BNC cable is optional. Contact a local Samsung Electronics Service Center to buy optional or Camcorder using the SOURCE button on the front of the LCD Display or on the remote control. • Then, start the VCR or Camcorders with a tape inserted - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 36
on the DVD player. Note • Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control. • Then, start the DVD Player with a DVD disc inserted. Note • A component cable is optional. For an explanation of Component video, consult - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 37
Top Box using the SOURCE button on the front of the LCD Display or on the remote control. Note • For an explanation of Component video, see your Set Top Box owner's manual. Connecting Speakers Note • Fasten the SET and the speaker using the screws. * Mount the speaker set without the speaker stand. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 38
SET is connected to the speakers. The speaker-bracket for connecting the SET speaker my become damaged. Connecting to an Audio System Note • Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the AUDIO OUT [L-AUDIO-R] on LCD Display. Connecting to a Wired Remote Control - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 39
the REMOTE IN terminal. Note • Restrictions: Available only if other devices support the wired remote control I/O terminals. Connecting HDMI Note • Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI cable. Note • You cannot connect a PC to the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 40
a USB Holder When using a small external device such as a portable memory stick and it is connected to the USB terminal at the back of your monitor, it is exposed to the possiblity of theft or loss. By installing a USB holder after the installation of an external device, you can prevent theft - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 41
back of your monitor. 2) Align part Align part of your USB holder with the groove at the bottom of part at the back of your monitor. of your USB holder with the bottom of part at the back of your monitor. 3) Insert a screw into the groove - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 42
back of your monitor. 2) Align part Align part of your USB holder with the groove at the bottom of part at the back of your monitor. of your USB holder with the bottom of part at the back of your monitor. 3) Insert a screw into the groove - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 43
Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Installation MagicNet MDC MagicNet Adjusting the LCD Display Troubleshooting Specifications Information Appendix The color and appearance of the product may vary depending on the model, and the product - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 44
6. Choose a folder to install the MagicNet program. 7. Click "Install." 8. The "Installation Status" window appears. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 45
the installation is complete, the MagicNet executable icon appears on your desktop. 11. Double-click the icon to start the program. System Requirements Minimum Recommended CPU RAM Ethernet P1.8 P3.0Ghz 256M 512M 100M/1G OS Windows XP Windows 2000 (Service Pack 4) Application WMP 9 or later - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 46
| Message | What is MagicNet? Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting MagicNet uses an Ethernet network for servers and monitors, and transfers media files (image files, music files, and movies) and office files (HTML, PDF) from the server to the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 47
5. Instants message → You can display a message on selected monitors regardless of schedules. 6. MDC and System → The MDC and System functions allow you to control, view the status of, and diagnose monitors. 7. VNC → The VNC function allows you to connect to a monitor remotely and view the status of - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 48
Management | Message | Using MagicNet Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting Running MagicNet 1. Click Programs -> MagicNetPro -> MagicNetPro. 2. When MagicNetPro runs, select Log In from the File menu. 3. Enter the user name and password and - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 49
the same as the IP address and the name of the server to connect to. (For more information, refer to the description of setting up MagicNet in the OSD pages.) 2. A message is displayed to notify that the monitor is successfully connected to the server. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 50
, or Flash file etc. on the server. 3. Right-click on the selected file and select Send To Library from the displayed menu to register it to the library. 4. The registered library files are used by the monitor when the Operating Mode of the monitor is set to Player or is used when registering - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 51
item. 5. Repeat steps 2 to 4 to register other areas on a screen. 6. After finishing registering areas, select Save from the File menu to save the screen. 7. Register a schedule to display the saved screen on a monitor(s). Registering a Schedule 1. Select Schedule from the File menu to open the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 52
at the left. The Operating Mode of the selected monitors must be set to Schedule if they can display the schedule registered on the server. 3. Click and select Add from the displayed menu. At this time, you can only select the schedules for the screens you saved using the Screen menu. 4. If you want - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 53
4. To display the message on the selected monitors, click the Send Message icon in the toolbar under the menu bar. To hide the message which will be displayed on the selected monitors, click the Stop Message icon in the toolbar. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 54
Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and have basic control over the monitors from the server. Close z Closes the screen view you - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 55
, refer to the Options section. Library Tree View List View Output View Tree View All the folders under My Computer on the Windows Desktop, library, screen, and content server are displayed in a tree view. If you select a folder, its subfolders and a list of files in it are - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 56
If you drag and drop a file from the list view to a library, a check is performed whether it can be registered to that library and if possible it is Screen Files Displays the screen management folders created with the Screen menu in a tree view. Function: Displays the subfolders and screen - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 57
servers onto a content server folder in the tree view, they are moved to that folder. List View Displays all the folders and files or content servers under a folder selected in the tree window as a list to that library. However, the drag & drop function is not supported for folders. Context Menu - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 58
If you click Send To Library for the selected files, they are registered to the library. Exploring Libraries Displays the subfolders and files under the selected folder. Function: Double-Click z Double-click to move to the However, the drag & drop function is not supported for folders. Context Menu - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 59
z Cut: Cuts the selected screen files to the clipboard so that level folder. z Property: Displays detailed information for the selected - Comments : Comments entered by the user for the selected library file. You can location. However, this hot key is not supported for folders. z Ctrl + V keys: - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 60
upper folder. to move to that lower folder. z If you drag and drop screen files to a screen folder in the tree view or the list view, they are moved to that folder. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you are - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 61
to a higher level folder, this menu item is deactivated. z Property: Displays detailed information for the selected screen file. You can enter a comment on it. - Name: The name of the selected screen - Location : The location where the selected screen is registered - Size : The size of the selected - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 62
can paste them to another location. However, this hot key is not supported for a folder. z Ctrl + V keys: Pastes the screen files cut to the clipboard to the selected location. Exploring the Content Server Displays the subfolders and content servers below the selected folder. Function: Double-Click - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 63
4) Comments: Comments about the selected content server. 5) History : Displays the synchronization history records for the content server. Hot Key z that you can paste them to another location. However, this hot key is not supported for folders. z Ctrl + V keys: Pastes the content servers cut to the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 64
| Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and performs basic control for the monitors from the server. Create - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 65
server options and user account features. Exit z Exits the program. If there are any unsaved changes, a new window is displayed so that position and size using your mouse. Preview Screen z Previews the current state. A separate preview window is displayed. To close the preview window, double-click - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 66
created in the Edit View. You can check the area currently selected in the Edit View using the Tree View. If you select a property of an area, the detailed property information is displayed in the List View. Context Menu z New: Initializes the screen view you are currently working with. If there - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 67
areas such as a movie and text on the background to compose a varied screen. If an office file or an external input is used as the background, you of the background and the total period of time that all screens are played. The Screen function allows you to set the background content you want to use - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 68
background changes to that of the screen. It cannot be less than the playing time of the area contained in the background. Screen Type: Sets the type of background using a Power Point, Excel, Word, or PDF file. The office file used is not configured as an area and is just displayed in Full mode in - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 69
z Stream: Streams the file to the monitor. z Context Menu: Add, Delete, Up, Down: Adds and deletes a file and changes the playing order. Music Sound: Turns the background sound on or off. Music File: Selects a music file for the background. Volume: Controls the volume of the background music. Repeat - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 70
, Effect functions. The Area function allows you to set the position where the photo is displayed and when and for how long it is displayed. The Screen function allows you to select photo files and how to display them. The Background function allows you to set the background image and music when the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 71
time in seconds. It cannot be longer than the background playing time. Screen Photo File: Selects a photo file to play in the Photo area. enlarged or reduced to fit the entire background. z Original: The photo file is displayed at the original size. z Auto: The photo file is enlarged or reduced to - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 72
or reduced to fit the entire background. z Original: The photo file is displayed at the original size. z Auto: The photo file is enlarged or reduced : Selects a music file for the background in the Photo area. Volume: Controls the volume for the background music in the Photo area. Repeat: A music - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 73
each type. z Transfer Mode: Changes the mode in which the selected file is transferred to the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor. z Context Menu: Add, Delete, Up, Down: Adds and deletes a file and changes the playing order - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 74
movie is played and when and for how long it is played. The Screen function allows you to select the movie file and how to play it. function allows you to set the background image and music when the movie is displayed. The Effect function allows you to set an effect for when the background changes - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 75
enlarged or reduced to fit the entire background. z Original: The movie file is displayed at the original size. z Auto: The movie file is enlarged or reduced to of the movie file to be played in the Movie area. Movie Volume: Controls the volume of the movie file to be played in the Movie area. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 76
background. z Original: The photo file is displayed at the original size. z Auto: The photo the background in the Movie area. Volume: Controls the volume of background music in the Movie monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 77
functions. The Area function allows you to set the position where the movie is played and when and for how long it is played. The Screen function allows you to set the flash file and how to play it. The Background function allows you to set the background image and music - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 78
time in seconds. It cannot be longer than the background playing time. Screen Flash File: Selects the flash file to be played in the Flash area or reduced to fit the entire background. z Original: The flash file is displayed at the original size. z Auto: The flash file is enlarged or reduced - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 79
or reduced to fit the entire background. z Original: The photo file is displayed at the original size. z Auto: The photo file is enlarged or reduced : Selects a music file for the background in the Flash area. Volume: Controls the volume of the background music in the Flash area. Repeat: A music - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 80
of each type. z Transfer Mode: Changes the mode in which the selected file is transferred to the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams to the monitor. z Context Menu: Add, Delete, Up, Down: Adds and deletes a file and changes the playing order. Effect - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 81
and Effect functions. The Area function allows you to set the position of the webpage and when and for how long it is displayed. The Screen function allows you to set the website file to connect to and the location of the web page. The Background function allows you to set - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 82
the Web area. Only one URL can be selected in the Web Area. Refresh: Sets the refresh time for the URL displayed in the Web area. Input Enable: You can input using the mouse in the Web area. Offset Left /Top / Right / Bottom: Moves the position of - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 83
z Original: The photo file is displayed at the original size. z Auto: file for the background in the Web area. Volume: Controls the volume of the background music in the Web area. the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 84
, Effect functions. The Area function allows you to set the position of the text and when and for how long it is displayed. The Screen function allows you to select the text and how to display it. The Background function allows you to set the background image and music when the text is - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 85
background size. Start Time, Stop Time, Duration: Sets the playing time in seconds. It cannot be longer than the background playing time. Screen Text: Sets the text to be displayed in the Text area. Direction: Sets the direction of the text flow in the Text area. z None z Right to Left z Left to - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 86
is operating. The same font should be installed in the monitor so that the monitor can display the same font. Align Horizontal, Vertical: Aligns the text : Selects a music file for the background in the Text area. Volume: Controls the volume of the background music in the text area. Repeat: A music - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 87
each type. z Transfer Mode: Changes the mode in which the selected file is transferred to the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor. z Context Menu: Add, Delete, Up, Down: Adds and deletes a file and changes the playing order - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 88
larger than the background size. Start Time, Stop Time, Duration: Sets the playing time in seconds. It cannot be longer than the background playing time. Screen Source List: Selects the source to be played in the Source area. Sound: Turns the sound for the source you want to play in the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 89
999, Sub channel range - 0 to 999) Edit View This view is used for screen design and allows you to create, move and change the size of an area using your preview the office files for the source and background. List View Displays the detailed functions of each property for the areas you selected in - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 90
| | Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and performs basic control for the monitors from the server. Save - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 91
in the EPG window. Copy / Paste z Copies the currently selected screen and pastes it after selecting a monitor and time by clicking in the EPG window. Publish (Network) z Publishes the currently configured schedules to the network monitors checked in the Publish View via the network. Publish (Local - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 92
EPG View List View Publish View Tree View Displays the connection state of the monitors currently connected to the server depending on the monitor icon. You can also efficiently manage the monitors by creating network groups. You can move a networked monitor by dragging and dropping it into a group - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 93
the same subnet, the Power On function can be used. Remote Access: Allows you to remotely control a monitor connected to the server via VNC. The Remote Access function can degrade the performance of the server and the monitor. The Remote Access function does not support monitors on a private network - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 94
the detailed times in the list view. If you select a monitor group in the tree view, the screen configured for all the monitors is displayed. The screen can be displayed by the day. If you select a monitor in the tree view, the screen for it is displayed. The date can be changed by the months. EPG - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 95
pastes it after selecting a monitor and time by clicking in the EPG window. Auto Size: Changes the currently selected screen in accordance with the time of the background set when editing automatically. Time Combo Box: Changes the unit of the time axis to be currently displayed. (1/5/10/30/60/120 - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 96
checked monitors. Beginning Day/ Start Time / End Day / Stop Time: Sets the time information for the schedules to be published to the monitors. Only the screens of the files downloaded to the monitor compared to the total screen (file) size. Result: Displays the publishing results. Double-click the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 97
Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and have basic control over the monitors from the server. Close z Closes the screen view you - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 98
Refresh z Refreshes the value of each client for the currently selected remote control item. Option z Changes the server settings. For more information, refer to the Options section. Remote Management Tree View List View Combo View - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 99
the MDC Source screen and change the channel, a red part is displayed in the Channel Selection screen so that you control it in the list view. Picture PC: Displays the current state of PC mode (PC, BNC, DVI, MagicNet). You can control it in the list view. Time : Sets the current time and displays - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 100
view. Maintenance: Displays the Lamp Control, Safety Screen, Video Wall, VideoWall Format, and Safety Lock state. You can control them in the list view. Diagnosis: Displays whether each client is normal or not. You can control the max. internal temperature of each client using the list view. System - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 101
setting in the list view. z For channels, only when the input source is TV, can you display or control the setting. (Only applicable for monitors that support TV.) Picture Video: Displays the current state of the Mode, Contrast, Brightness, Sharpness, Color, Tint, Color Tone, Color Temperature, Size - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 102
the monitor will display. z The Screen Settings only operate when the Screen Matrix Display function is activated. Diagnosis: Displays whether the lamp, internal temperature of the client, brightness sensor and fan are normal, and displays the current and maximum temperatures. You can control the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 103
in MDC. Detailed Items System: Displays the information for the model name, serial number, screen size, firmware version, MagicNet version, and OS image version. General: Displays the specifications and name of the computer and the information for the work group, user, and product key. Performance - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 104
whether to display a system message for the selected client. 6) The Current Status and Screen Resolution items cannot be changed. MagicNet: Displays information for the Startup, Automatic update, Use password lock, and Content server. You can change the settings by double-clicking the monitor name - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 105
If the setting is not yet displayed or the item has no setting, the item cannot be copied. z The System, General, Performance, and Network items cannot be copied. z The screen resolution item of Windows cannot be copied. Paste: Pastes the copied setting to the monitor. z Only available if the copied - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 106
in Scheduler mode. z : The server is connected to the monitor in an unknown mode. z : The server is not connected to the monitor or the monitor is a local monitor. Combo View Displays all monitor groups except for local monitor groups so you can select a group. If you select a group, a list of - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 107
| | Client / Contents | Server Schedule Troubleshooting File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can run a screen schedule and perform basic control for the monitors from the server. New - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 108
program. If there are any unsaved changes, a new window is displayed so that you can save them. Tool Menu Undo / Redo using the Option menu. Send / Stop z Checks the edited message data in a tree view and sends (or stops) them to the selected monitor. Option z SChanges the server settings. Refer to - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 109
the message is sent by checking the checkbox next to each monitor and group. List View Changes the detailed functions for the message to be sent to the monitors by double-clicking it or by clicking the created button. Message: Sets a message to be displayed on the monitor. The set message is not - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 110
What is MagicNet? | Using MagicNet | Remote Management | Message | Option Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting Option General Network Connection: Selects the connection method between the server and the monitor. The server and monitor can - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 111
monitors. Maximum number of Alarm Infos: Specify the number of warning messages that can be stored which notify the user of client errors. If more than the specifed you can register, save and import screens. When set to 0, you cannot register, save or import the screens before the present time. Set - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 112
error messages: Sets the options for errors that may occur when a screen is previewed. z Do not display error messages: When an error occurs, the next preview operation continues without an error message being displayed. z Display error messages during a fixed time: When an error occurs, an error - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 113
What is MagicNet? | Using MagicNet | Remote Management | Message | Contents Server Library Option | Screen | | Client / Contents Server | Schedule Troubleshooting A program run on the additional PC where the content server is operating. Version: The version of the content Server. MAC - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 114
screen with the selected option. Program Runs or exits the program. Exit Exits mnMain. If you exit mnMain, MagicNet X and the Schedule program are also exited together. EWF: Displays MagicNet X. Verifies the password before you enter the Setup screen. If the Use Password lock checkbox is checked, - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 115
password lock z Verifies your password before you enter the Setup screen. Setup Connection Tab Schedule server z Server Connection Settings { The client connects to another server automatically. { The client connects to the server manually. (Enter the IP address of the server). Content server z Up - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 116
the specified content server and the schedule server performs only the schedules and the remote control function. z Preferred IP : Enter the IP address of the computer that operates as client connects to. z Client : Set the name of the monitor to connect to the schedule server. Program Tab Startup - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 117
z Player: Runs a media player program that can be run using the remote control and can receive and play the content that exists on the server. (MagicNet X) z Runs the program that displays the information. This program displays a screen that is created on the server at the specified time and can be - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 118
on the D: drive or a removable disk, as the C: drive is used for the system.) { Space: Sets the disk size limit used for the schedule.Between 10% to 90 exits. Options Tab Other Options z Show loading screen before program start: Displays a loading screen from the time after your computer is booted to - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 119
? | Using MagicNet | Remote Management | Message | Troubleshooting Library Option | Screen | | Client / Contents | Server Schedule Troubleshooting When a monitor is not connected to the server z Check whether the network environment for the server and monitor is normal.. (Check the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 120
server wants to register to the monitor. If more than one codec of the same type has been installed or an incomplete codec is installed on the PC, it may cause a problem. When an area edited on a screen cannot be previewed or the preview function does not work z Check whether the file you want - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 121
communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 122
main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the display unit. 3. Set the Safety Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. 4. The setting for - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 123
port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. The selected port is stored in the program and used for the next program as well. Power Control 1. Click Power Control of the main icons and the Power Control screen appears. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 124
Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a display to control. Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 125
available for all displays. The Volume Control and Mute features are available only for the displays whose power status is ON. Input Source 1. Click Input Source of the main icons and the Input Source control screen appears. Click Select All or use Check Box to select a display to control. • TV Mode - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 126
display to Component. 9) MagicNet - The Input source of MagicNet works only on MagicNet model. 10) HDMI - Changes the Input Source of the selected display and controlling channels is allowed only when Input Source is TV. The Input Source Control feature is available only for the displays whose power - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 127
only on MagicNet model. The Input source of TV works only on TV model. Image Size Control is available only for the displays for which power status is ON. Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV 1. Click Image Size of the main icons and the Image Size control screen appears. - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 128
DTV. Click Select All or use Check Box to select a display to control. 2) Info Grid displays only the display having TV, AV, S-Video, MagicNet works only on MagicNet model. The Input source of TV works only on TV model. The Image Size Control feature is available only for the displays whose power - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 129
only for the displays for which the power status is ON. At On Time Setup, TV Source functions only for TV Model. At On Time Setup, MagicNet Source functions only for MagicNet Model. PIP PIP Size 1. Click PIP of the main icons and the PIP control screen appears. Click Select All or use Check Box to - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 130
display and changes the size to Double 3. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. PIP Size can be controlled with turning on the LCD Display power. PIP PIP Source 1. Click PIP of the main icons and the PIP control screen appears - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 131
may not be available for selection, depending on the input source type of the Main Screen. The Input source of MagicNet works only on MagicNet model. The PIP Control feature is available only for the displays whose power status is ON and the PIP function is set to ON. Settings Picture 1. Click - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 132
the Dynamic Contrast for the selected display. The Input source of MagicNet works only on MagicNet model. Color Temp is only enabled if the Color Tone is set to Off. The Input source of TV works only on TV model. This feature is available only for the displays whose power status is ON and if - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 133
the Brightness Sensor for the selected display. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. Color Temp is only enabled if the Color Tone is set to Off. This feature is available only for the displays whose power status is ON and if - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 134
on MagicNet model. The Input source of TV works only on TV model. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed. Settings Image Lock 1. Click Settings of the main icons and the Settings Control screen appears - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 135
to the incoming PC signal. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. Settings Control is available only for the displays for which the power status is ON. Maintenance Lamp Control 1. Click on the "Maintenance" icon in the Main Icon - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 136
regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicNet works only on MagicNet model. The Input source of TV works - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 137
of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. Setting Second, you can set to 1, 2, 3, 4, 5 for Scroll Type and to 10, 20, 30, 40, 50 for Pixel, Bar, and Eraser Type. The Maintenance Control feature is available only for the displays whose power status - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 138
. z The MDC program supplied by Samsung supports up to 5x5 LCD Displayes. 3) On / Off - Turns on/off the Video Wall function of the selected display. 4) Format - The format can be selected to see a divided screen. z Full z Natural You may not operate this function in MagicNet. The Input source of - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 139
25. (Adjust using the Display menu) Note : A Display Set ID must be a value between 0 and 25 . 2. The display you wish to control does not appear on the other Control Info Grids - Check to see if the display power is ON. (You can check this in Power Control Info Grid) - Check if you can change the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 140
Introduction Connections Using the Software Adjusting the LCD Display Input Picture [PC / BNC /DVI Mode] Picture [AV / S-Video / Component / HDMI Mode] Sound Setup Multi Control Direct Functions MagicNet Troubleshooting Specifications Information Appendix The color and appearance of the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 141
The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window. [The direct button on the remote control is the 'SWAP' button.] 4) Size [MENU] → [ HDMI Picture [PC / BNC /DVI Mode] Available Modes PC / BNC / DVI AV S-Video Component HDMI MagicNet - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 142
button on the remote control is the 'M/B' button.] Custom [MENU ENTER ENTER] → [ENTER ENTER] By using the on-screen menus, the contrast can be changed. 1) Off 2) Cool 3) Normal 4) Warm 5) Custom (Available in PC, BNC mode only) Note • If you set the Color Tone to Cool, Normal, Warm, or Custom, - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 143
[MENU ENTER ENTER] → [ENTER ENTER] Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. 2) Fine [MENU ENTER ENTER ENTER ENTER] Removes noise such as horizontal stripes. If the noise - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 144
through the PIP screen in PC, BNC and DVI mode. Operates only if the video signal is NTSC. Available Modes: PIP ON Picture [ AV / S-Video / Component / HDMI Mode] Available Modes PC / BNC / DVI AV S-Video Component HDMI MagicNet Mode [MENU ENTER] → [ENTER ENTER] The LCD Display has four automatic - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 145
2) Standard 3) Movie 4) Custom [The direct button on the remote control is the 'P.MODE' button.] Custom [MENU ENTER ENTER ENTER ENTER] By using the on-screen menus, the contrast and brightness can be changed to your personal preference. 1) Contrast Adds a natural tone to the PIP window. 2) - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 146
) 1) Off 2) On PIP Picture [MENU ENTER ENTER ENTER ENTER ENTER] Adjusts the PIP Screen Settings. 1) Contrast Adjusts the Contrast of the PIP window on the screen. 2) Brightness Adjusts the Brightness of the PIP window on the screen. Available Modes: PIP ON Sound Available Modes PC / BNC / DVI - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 147
Video Component HDMI MagicNet Mode [MENU ENTER] → [ENTER ENTER] The LCD Display has a problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 148
MagicNet Controls the mode and the volume level at the time the LCD Display turns on automatically. 4) Off Timer [MENU ENTER ENTER ENTER ENTER] Turns the LCD Display off automatically at a preset time. Note • When selecting Yes for the On Timer or Off Timer when the Clock is not set up, a guiding - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 149
the remote Power On function of the MDC and the WOL (Wake On LAN) function of MagicNet. HDMI Black Level [ display Off/On. - Off - On 2) Format [MENU ENTER ENTER ENTER ENTER] The format can be selected to see a divided screen. - Full Provides a full screen without any margins. - Natural Displays - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 150
MagicNet mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. - The Screen Scroll function scrolls the screen for the specified period of time. - This function is not available when the power - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 151
the picture displayed on the screen in the screen. *Caution: Set the Power On time to be loger to avoid overvoltage. FAN [MENU ENTER ENTER ENTER] Adjusts the FAN. 1) Normal 2) Pivot Note • When pivoting your monitor, make sure to select PIVOT for the FAN. Reset The picture parameters are replaced - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 152
to the Multi Control OSD screen. LOCK Sets the Safety Lock function. 1) Lock On It will be locked. 2) Lock Off It will be unlocked. Note • When setting the Lock function, you can only operate the power and lock buttons on the remote control and set. The preset password on the LCD Display is "0000 - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 153
-On option works only if the LCD Display's power is completely shut off. Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display. • In the OSD image of MagicNet, Network mode is the same as Device - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 154
the image control Menu. Music The MP3 file format is supported. Movie The MPEG1, WMV file format are supported. 1) Play Plays a movie file. 2) Full Size Plays a movie file in full screen. OFFICE / HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. * Install the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 155
768x1366 pixels. Notice • It is highly recommended not to turn off the AC power during an operation. Note • For pivoted monitors, ticker transparency is not supported. • For pivoted monitors, a screen resolution of up to 720*480(SD) is supported for movies. © 1995~2007 SAMSUNG. ALL Rights Reserved - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 156
Troubleshooting Self-Test Feature Check Note • Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check Your LCD Display provides a self test feature that allows you to check whether your LCD - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 157
or the video card, this can cause the LCD Display to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer. 1) Check if the power cord and the video cables are properly - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 158
Screen Note • Problems related to the LCD Display screen and their solutions are listed. Problems The screen is blank and the power indicator is off. Solutions z Ensure that the power cord is firmly connected and the LCD LCD Display is on. (Refer to the Connecting the LCD Display ) "Check Signal - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 159
the Remote Control Note • Problems related to the remote control and their solutions are listed. Problems The remote control buttons do not respond. Solutions z Check the polarities (+/-) of the batteries. z Check if the batteries are empty. z Check if the power is on. z Check if the power cord - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 160
Power Saving function? z Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). z Windows ME/2000: Set the resolution at the Control Panel → Display → Screen - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 161
are subject to change without prior notice for reasons of performance enhancement. Specifications General General General Model Name SyncMaster 400DXn LCD Panel Size 40 " Diagonal (101 cm) Display area 885.168 mm(H) x 497.664 mm(V) Pixel Pitch 0.648 mm (H) x 0.648 mm (V) Synchronization - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 162
, Power Point) or PDF documents. Not Support Flash, Java Applet, Security Site MagicNet - Server Requirement Minimum Recommended CPU P1.8 Ghz P3.0 Ghz RAM 256 M 512 M Ethernet 100 M / 1 G 100 M / 1 G OS Windows XP Windows XP Application WMP 9 or later WMP 9 or later PowerSaver This monitor - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 163
is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and Adjusts the screen as follows. Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 164
Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz © 1995~2007 SAMSUNG. ALL Rights Reserved - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 165
(Analog, Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz Signal Cable 15pin to 15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable (Sold separately) Dimensions (WxHxD)/ Weight 1268.0 x 681.0 x 311.0 mm / 49.9 x 26.8 x 12.2 inch (With Speaker & With Stand) 1068.0 x 624 - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 166
, Power Point) or PDF documents. Not Support Flash, Java Applet, Security Site MagicNet - Server Requirement Minimum Recommended CPU P1.8 Ghz P3.0 Ghz RAM 256 M 512 M Ethernet 100 M / 1 G 100 M / 1 G OS Windows XP Windows XP Application WMP 9 or later WMP 9 or later PowerSaver This monitor - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 167
is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and Adjusts the screen as follows. Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 168
Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz © 1995~2007 SAMSUNG. ALL Rights Reserved - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 169
Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information For Better Display PRODUCT INFORMATION (Image Retention Free) Appendix The color and appearance of the product may vary depending on - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 170
power off for 2 hours after 12 hours in use z Set the Monitor to power off with the PC Display Properties Power Scheme. z Use a Screen saver if possible - Screen Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey) Change the characters color periodically z Use - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 171
in use. z The best way to protect your monitor from Image retention is to turn Power off, or set your PC, or System to operate a Screen Saver program when you are not using it. Also Warranty service will be limited based on instruction guide. Apply the Screen Scroll function on Product z Apply the - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 172
: 2 Vertical blocks move with erasing the display - Select method . Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser . Time Interval : 1 ~ 10 hours ( Recommend : 1 ) . Time Period : 10 ~ 50 second ( Recommend : 50 ) Note • ( Please check CD's User Guide at "OSD Function", some model - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 173
Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix Contact SAMSUNG WORLDWIDE Terms Correct Disposal Authority The color and appearance of the product may vary depending on - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 174
0771-400 200 0800-SAMSUNG(726-7864) 0870-SAMSUNG(726-7864) http://www.samsung.com/dk http://www.samsung.com/fi http://www.samsung.com/fr http://www.samsung.de http://www.samsung.com/hu http://www.samsung.com/it http://www.samsung.com/be http://www.samsung.com/nl http://www.samsung.com/no http://www - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 175
that used in TVs. Plug & Play This is a function that provides the best quality screen for the user by allowing the computer and the LCD Display to exchange information automatically. This LCD Display follows the international standard VESA DDC for the Plug & Play function. Resolution The number - Samsung 400DXn | User Manual (user Manual) (ver.1.0) (English) - Page 176
and other European countries with separate collection systems) This marking shown on the product or environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.;
Install Programs
PDF Manuals
Registration
Safety Instructions
Introduction
Connections
Using the Software
Adjusting the LCD Display
Troubleshooting
Specifications
Information
Appendix
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Model
Select Language
SyncMaster 400DXn / 460DXn