Samsung 400P User Manual

Samsung 400P - SyncMaster - LCD Monitor Manual

Get Samsung 400P - SyncMaster - LCD Monitor PDF manuals and user guides
UPC - 729507708461
View all Samsung 400P manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 400P manual content summary:

  • Samsung 400P | User Manual - Page 1
      Install Pro grams SyncMaster 400Pn/400P Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 2
    to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 3
    may cause fire. Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with the heavy dust, high or low etc. Failure to do so may cause a serious damage to your monitor. Put your monitor in a location with low humidity and a minimum of dust. z Failure
  • Samsung 400P | User Manual - Page 4
    walking by, specifically children. Do not place the product on the floor. z Someone, specifically children could trip monitor carefully. z The monitor could be damaged or broken. Do not place the monitor face down. z The TFT-LCD surface may be damaged. Downloaded from www.Manualslib.com manuals
  • Samsung 400P | User Manual - Page 5
    Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than life and degraded performance. Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric
  • Samsung 400P | User Manual - Page 6
    z Refer servicing to qualified service personnel. If your monitor does not operate monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center . z The monitor to the cable. Do not move the monitor right or left by pulling only the wire
  • Samsung 400P | User Manual - Page 7
    the power connector from the wall outlet and contact Service Center. If you view a picture when you need to be away from the monitor for an extended period of time. Adjust the resolution and frequency to the levels appropriate for the model. z Inappropriate resolution may cause undesirable picture
  • Samsung 400P | User Manual - Page 8
    lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all causing physical damage or even death. When you remove batteries from the remote, be careful that they are not swallowed by children. Keep batteries out manuals search engine
  • Samsung 400P | User Manual - Page 9
    public recycling center or to a store selling the same type of the battery or rechargeable battery. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 10
      SyncMaster 400Pn Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. This stand is not for the Floor Standing Type. Unpacking Manual Monitor Quick Setup Guide Warranty Card (Not
  • Samsung 400P | User Manual - Page 11
    D-Sub Cable Sold separately Power Cord Speaker Wire Cable Wall Mount KIT Speaker Set Stand KIT Others DVI Cable LAN Cable Remote Control Batteries (AAA X 2) Cover-Hole BNC to RCA Adapter Jack Semi Stand Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 12
    in external devices that are connected to the monitor at the time. To switch Screen modes: [PC] [BNC] [DVI] [AV] [S-VIDEO] [Component] [MagicNet] >>Click here to 9. Remote Control Sensor Aim the remote control towards this spot on the Monitor. See PowerSaver described in the manual for
  • Samsung 400P | User Manual - Page 13
    may vary slightly depending on the monitor model. 1. POWER SW : Switch the monitor on and off. 2. POWER IN : Power cord, plug into monitor and wall receptacle. 3. RS232C OUT/IN (RS232C Serial PORT): MDC(Multiple Display Control) Program Port 4. DVI IN(HDCP) (PC Video Connection Terminal) : Using DVI
  • Samsung 400P | User Manual - Page 14
    12. AV IN [VIDEO](VIDEO Connection Terminal) (Input) 13. AV OUT [S-VIDEO](S-Video Connection Terminal) : S-Video mode (Output) 14. AV IN [S-VIDEO](S-Video Connection Terminal) (Input) 15. EXT SPEAKER(8 Ω) (EXT Speaker Connection Terminal) 16. MONITOR OUT [L-AUDIO-R](Monitor Audio Connection Terminal
  • Samsung 400P | User Manual - Page 15
    light Monitor for further information regarding cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic devices operated near the monitor, causing malfunction due to interference with frequency. Downloaded from www.Manualslib.com manuals
  • Samsung 400P | User Manual - Page 16
    . PIP 23. SOURCE 24. SIZE 25. SWAP 26. 27. 28. 29. MagicNet Remote Control 1. ON / OFF Use these buttons to turn the monitor on or off. 2. MAGICNET MagicNet Quick Launch Button. 3. MDC MDC Quick Launch Button. "+100", then press "2" and "1". Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 17
    the Mute mode. 9. AUTO Adjusts the screen display automatically. If you change resolution in the control panel, auto function will be executed. picture mode is displayed on the lower center of the screen. AV / S-Video / Component : P.MODE The Monitor has four automatic picture manuals search engine
  • Samsung 400P | User Manual - Page 18
    SAP Mono - This fuction does not work for this monitor. SAP Default Manual Change Mono 22. PIP Every time you push the button , a PIP screen appears. 23. SOURCE The PIP window's signal source changes. 24. SIZE You can switch the Picture
  • Samsung 400P | User Manual - Page 19
    Remote Control PHOTO z When the files are selected in the library list Previous file Stop slideshow / View the bottom menu bar Slideshow Next file z When you see no menu in a zoomed-in picture Move up to the top last file of the previous page) Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 20
    page) Move to the next page (when the current page is the first, it will move to the last page) Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 21
    Normal Move to the top Move to the bottom Move to the next page Move to the previous page Exit PDF Move to the upper cell Move to the lower cell Move to the left cell Move to the right cell Exit Excel Move to the top Move to the previous page Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 22
    the top Move to the bottom Move to the next page Move to the previous page Exit Word z HTML / Ineternet Downloaded from www.Manualslib.com manuals search engine Move the mouse cursor up Move the mouse cursor down Move the mouse cursor to the left Move the mouse cursor to the
  • Samsung 400P | User Manual - Page 23
    Click when the cursor is placed over a link (move to the link) Exit the Internet Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 24
      SyncMaster 400P Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. This stand is not for the Floor Standing Type. Unpacking Manual Monitor Quick Setup Guide Warranty Card (Not
  • Samsung 400P | User Manual - Page 25
    D-Sub Cable Sold separately Power Cord Speaker Wire Cable Wall Mount KIT Speaker Set Stand KIT Others DVI Cable Remote Control Batteries (AAA X 2) Cover-Hole BNC to RCA Adapter Jack Semi Stand Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 26
    only in external devices that are connected to the monitor at the time. To switch Screen modes: [PC] [BNC] [DVI] [AV] [S-VIDEO] [Component] >>Click here to see an 9. Remote Control Sensor Aim the remote control towards this spot on the Monitor. See PowerSaver described in the manual for
  • Samsung 400P | User Manual - Page 27
    may vary slightly depending on the monitor model. 1. POWER SW : Switch the monitor on and off. 2. POWER IN : Power cord, plug into monitor and wall receptacle. 3. RS232C OUT/IN (RS232C Serial PORT): MDC(Multiple Display Control) Program Port 4. DVI IN(HDCP) (PC Video Connection Terminal) : Using DVI
  • Samsung 400P | User Manual - Page 28
    VIDEO](VIDEO Connection Terminal) (Input) 13. AV OUT [S-VIDEO](S-Video Connection Terminal) : S-Video mode (Output) 14. AV IN [S-VIDEO](S-Video Connection Terminal) (Input) 15. EXT SPEAKER(8 Ω) (EXT Speaker Connection Terminal) 16. MONITOR OUT [L-AUDIO-R](Monitor .Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 29
    cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic devices operated near the monitor, causing malfunction due 29. 1. ON / OFF Use these buttons to turn the monitor on or off. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 30
    the remote control and the monitor except fuction does not work for this monitor. 6. +100 Press to select not work for this monitor. 7. VOL Adjusts the screen display automatically. If you change resolution in the monitor. 14. SOURCE Push this button to change video sources. 15. INFO Current picture
  • Samsung 400P | User Manual - Page 31
    current picture mode is displayed on the lower center of the screen. AV / S-Video / Component : P.MODE The Monitor has four automatic picture settings Mono Stereo SAP Mono - This fuction does not work for this monitor. SAP Default Manual Change Mono 22. PIP Every time you push the button,
  • Samsung 400P | User Manual - Page 32
    Mechanical Lay-out | Monitor Head | Stand | Speaker | Installation VESA Bracket | Wall Bracket Installation 1. Mechanical Lay-out 2. Monitor Head Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 33
    Stand 4. Speaker 5. Installation VESA Bracket z When installing VESA, make sure to comply with the international VESA standards. z Purchasing VESA Bracket and Installation Information : Please contact your nearest Samsung in order to move the LCD Monitor. z Samsung is not responsible for any product
  • Samsung 400P | User Manual - Page 34
    Screw(B) Anchor (4) (11) (4) (11) Wall Bracket Assembly Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. A. Captive Screw B. Wall Bracket C. Hinge (Left) D. Hinge (Right) Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 35
    brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A. To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) Downloaded from www.Manualslib.com
  • Samsung 400P | User Manual - Page 36
    B into the plastic hanger. 1. Mount the product on the wall bracket and make sure it is properly caught in the holes. 3. Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place Monitor B. Wall Bracket C. Wall Wall Bracket Angle Adjustment Adjust the bracket angle to
  • Samsung 400P | User Manual - Page 37
    1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle. 3. the top center, and not the leftor the right side of the product to adjust the angle. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 38
    the bottom of the monitor, where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 39
    to protect the hole at the bottom of the monitor, where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit. 2. Make sure you put the parts in
  • Samsung 400P | User Manual - Page 40
    . Connect the DVI Cable to the DVI(HDCP) port on the back of your monitor. 2-3. Using the BNC (Analog) connector on the video card. Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V port on the back of your Monitor and the 15 pin D-sub Port on the computer. Downloaded from www.Manualslib
  • Samsung 400P | User Manual - Page 41
    . 4. Turn on both your computer and the monitor. Contact a local Samsung Electronics Service Center to buy optional items. 2. Connecting to a VCR 1. AV input devices like VCRs or Camcorders are connected to the AV IN [VIDEO] or AV IN [S-VIDEO] of the monitor using the S-VHS or BNC cable. S-VHS
  • Samsung 400P | User Manual - Page 42
    is connected to a DVD player using the Source button on the monitor's front or remote control. 4. Then, start the DVD Player with a DVD disc inserted. For an explanation of Component video, see your DVD player owner's manual. 4. Connecting a Camcorder 1. Locate the A/V output jacks on the camcorder
  • Samsung 400P | User Manual - Page 43
    button on the monitor's front or remote control. For an explanation of Component video, see your Set Top Box owner's manual. 6. Connecting Speakers 1. Tighten the SET and the speaker using the screws. * Mount the set of the speaker without the speaker stand. 2. Connect the speaker connection cable
  • Samsung 400P | User Manual - Page 44
    1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the MONITOR OUT [L-AUDIO-R] on the Monitor. 8. Connecting the LAN Cable 1. Connect the LAN cable. 9. Connecting USB 1. You can connect to USB devices such as a mouse or keyboard. 10. Connecting the Digital
  • Samsung 400P | User Manual - Page 45
    Settings Control : Picture | Picture PC | Audio | Image Lock | 9. Maintenance Control - Lamp Control 10. Maintenance Control - Scroll 11. Maintenance Control - Video Wall 12. Troubleshooting 13. Settings Value Display In Multiple Display Mode Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 46
    > Multiple Display Control to start the program. Select a set to see the volume of the selected set within the slider. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 47
    . 2. Allows you to enable or disable the remote control signal receiving function of the display unit. Use Control Tools to control displays. The remote control Enable/Disable function operates whether or not time the MDC is shut down, the remote control signal receiving function of all displays
  • Samsung 400P | User Manual - Page 48
    can be selected in Port Selection Menu. 3. If the exact port name which is connected to the monitor using a serial cable is not selected, communication will not be unavailable. 4. The selected port is stored Box to choose a display to control. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 49
    , enable Mute when the Mute function is enabled for the selected set. The Mute function is disabled automatically when you adjust the volume level. (The values return to the default settings when you undo the of the selected display to BNC. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 50
    is available only for the displays for which power status is ON. The Input source of MagicNet works only on MagicNet model. 5. Image Size Control - AV, S-Video, Component, DVI(HDCP) 1. Click Image Size of the main icons and the Image Size control screen appears. Downloaded from www.Manualslib
  • Samsung 400P | User Manual - Page 51
    a display to control. 2) Info Grid displays only the display having AV, S-Video, Component or DVI(HDCP) as input source. 3) Switch Image Size of the selected power status is ON. The Input source of MagicNet works only on MagicNet model. 6. Time Control 1. Click Time of the main icons and the Time
  • Samsung 400P | User Manual - Page 52
    changes the size to Double 2. 7) Double3 (Picture By Picture) - Turns on the PIP of the selected display and changes the size to Double 3. PIP Size can be controlled with turning on the monitor power. The Input source of MagicNet works only on MagicNet model. 7. PIP Control - PIP Source 1. Click PIP
  • Samsung 400P | User Manual - Page 53
    PIP Source can be controlled with turning on the monitor power. 2) PC - Changes the source of the display to AV. 6) S-Video - Changes the source of the PIP of the selected display to S-Video. 7) Component - Changes the only on MagicNet model. 8. Settings Control - Picture 1. Click Settings of the
  • Samsung 400P | User Manual - Page 54
    Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture - Available only for AV, S-Video, Component, DVI(HDCP). 2) Contrast . The Input source of MagicNet works only on MagicNet model. 8. Settings Control - Picture PC 1. Click Settings of the main icons and the
  • Samsung 400P | User Manual - Page 55
    (50) returns. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture PC - Available only for PC, BNC, DVI. 2) factory default is displayed. The Input source of MagicNet works only on MagicNet model. 8. Settings Control - Audio 1. Click Settings of the main icons
  • Samsung 400P | User Manual - Page 56
    the default value (50) returns. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Audio - Controls audio settings for default is displayed. The Input source of MagicNet works only on MagicNet model. 8. Settings Control - Image Lock 1. Click Settings of the main
  • Samsung 400P | User Manual - Page 57
    display regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control function. The Maintenance Control feature is available only MagicNet works only on MagicNet model. 11. Maintenance Control - Video Wall Downloaded from www.Manualslib.com
  • Samsung 400P | User Manual - Page 58
    Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture z 3*3 z 1*5 z 5*1 3) On / Off - Turns on/off the Video Wall function of the selected display. 4) Format - The format can be selected to
  • Samsung 400P | User Manual - Page 59
    status is ON. The Input source of MagicNet works only on MagicNet model. 12. Troubleshooting 1. The display you wish to control does not appear on the program and turn the remote function again to Restore normal functions. This program may malfunction due to problems in communication circuits or
  • Samsung 400P | User Manual - Page 60
    the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM Drive, click the [Start]
  • Samsung 400P | User Manual - Page 61
    the MagicNet Server program. Please enter the password to login. The password cannot be changed when you are logged in. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 62
    6. Choose a folder to install the MagicNet program. 7. Click "Install." 8. The "Installation Status" window appears. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 63
    the icon to start the program. System Requirements Minimum Recommended CPU P1.8 P3.0Ghz RAM 256M 512M Ethernet 100M OS Application Windows XP Windows 2000 (Service Pack 4) WMP 9 or later Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 64
    the bottom of the monitor, where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 65
    to protect the hole at the bottom of the monitor, where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit. 2. Make sure you put the parts in
  • Samsung 400P | User Manual - Page 66
    . Connect the DVI Cable to the DVI(HDCP) port on the back of your monitor. 2-3. Using the BNC (Analog) connector on the video card. Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V port on the back of your Monitor and the 15 pin D-sub Port on the computer. Downloaded from www.Manualslib
  • Samsung 400P | User Manual - Page 67
    . 4. Turn on both your computer and the monitor. Contact a local Samsung Electronics Service Center to buy optional items. 2. Connecting to a VCR 1. AV input devices like VCRs or Camcorders are connected to the AV IN [VIDEO] or AV IN [S-VIDEO] of the monitor using the S-VHS or BNC cable. S-VHS
  • Samsung 400P | User Manual - Page 68
    is connected to a DVD player using the Source button on the monitor's front or remote control. 4. Then, start the DVD Player with a DVD disc inserted. For an explanation of Component video, see your DVD player owner's manual. 4. Connecting a Camcorder 1. Locate the A/V output jacks on the camcorder
  • Samsung 400P | User Manual - Page 69
    button on the monitor's front or remote control. For an explanation of Component video, see your Set Top Box owner's manual. 6. Connecting Speakers 1. Tighten the SET and the speaker using the screws. * Mount the set of the speaker without the speaker stand. 2. Connect the speaker connection cable
  • Samsung 400P | User Manual - Page 70
    Settings Control : Picture | Picture PC | Audio | Image Lock | 9. Maintenance Control - Lamp Control 10. Maintenance Control - Scroll 11. Maintenance Control - Video Wall 12. Troubleshooting 13. Settings Value Display In Multiple Display Mode Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 71
    > Multiple Display Control to start the program. Select a set to see the volume of the selected set within the slider. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 72
    . 2. Allows you to enable or disable the remote control signal receiving function of the display unit. Use Control Tools to control displays. The remote control Enable/Disable function operates whether or not time the MDC is shut down, the remote control signal receiving function of all displays
  • Samsung 400P | User Manual - Page 73
    can be selected in Port Selection Menu. 3. If the exact port name which is connected to the monitor using a serial cable is not selected, communication will not be unavailable. 4. The selected port is stored Box to choose a display to control. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 74
    , enable Mute when the Mute function is enabled for the selected set. The Mute function is disabled automatically when you adjust the volume level. (The values return to the default settings when you undo the of the selected display to BNC. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 75
    is available only for the displays for which power status is ON. The Input source of MagicNet works only on MagicNet model. 5. Image Size Control - AV, S-Video, Component, DVI(HDCP) 1. Click Image Size of the main icons and the Image Size control screen appears. Downloaded from www.Manualslib
  • Samsung 400P | User Manual - Page 76
    a display to control. 2) Info Grid displays only the display having AV, S-Video, Component or DVI(HDCP) as input source. 3) Switch Image Size of the selected power status is ON. The Input source of MagicNet works only on MagicNet model. 6. Time Control 1. Click Time of the main icons and the Time
  • Samsung 400P | User Manual - Page 77
    changes the size to Double 2. 7) Double3 (Picture By Picture) - Turns on the PIP of the selected display and changes the size to Double 3. PIP Size can be controlled with turning on the monitor power. The Input source of MagicNet works only on MagicNet model. 7. PIP Control - PIP Source 1. Click PIP
  • Samsung 400P | User Manual - Page 78
    PIP Source can be controlled with turning on the monitor power. 2) PC - Changes the source of the display to AV. 6) S-Video - Changes the source of the PIP of the selected display to S-Video. 7) Component - Changes the only on MagicNet model. 8. Settings Control - Picture 1. Click Settings of the
  • Samsung 400P | User Manual - Page 79
    Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture - Available only for AV, S-Video, Component, DVI(HDCP). 2) Contrast . The Input source of MagicNet works only on MagicNet model. 8. Settings Control - Picture PC 1. Click Settings of the main icons and the
  • Samsung 400P | User Manual - Page 80
    (50) returns. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture PC - Available only for PC, BNC, DVI. 2) factory default is displayed. The Input source of MagicNet works only on MagicNet model. 8. Settings Control - Audio 1. Click Settings of the main icons
  • Samsung 400P | User Manual - Page 81
    the default value (50) returns. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Audio - Controls audio settings for default is displayed. The Input source of MagicNet works only on MagicNet model. 8. Settings Control - Image Lock 1. Click Settings of the main
  • Samsung 400P | User Manual - Page 82
    display regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control function. The Maintenance Control feature is available only MagicNet works only on MagicNet model. 11. Maintenance Control - Video Wall Downloaded from www.Manualslib.com
  • Samsung 400P | User Manual - Page 83
    Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture z 3*3 z 1*5 z 5*1 3) On / Off - Turns on/off the Video Wall function of the selected display. 4) Format - The format can be selected to
  • Samsung 400P | User Manual - Page 84
    status is ON. The Input source of MagicNet works only on MagicNet model. 12. Troubleshooting 1. The display you wish to control does not appear on the program and turn the remote function again to Restore normal functions. This program may malfunction due to problems in communication circuits or
  • Samsung 400P | User Manual - Page 85
    the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM Drive, click the [Start]
  • Samsung 400P | User Manual - Page 86
      SyncMaster 400Pn Input Available Mode : PC / BNC / DVI : AV : S-Video : Component OSD Source List PIP Description Use to select PC, BNC or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is '
  • Samsung 400P | User Manual - Page 87
    Video signal. (Off/On) More than one PIP couldn't be overlapped on screen as BNC and the component use the same terminal. 1) PIP - The direct button on the remote remote control is 'SOURCE' button. PC / DVI : AV / S-Video / Component Mode BNC : AV / S-Video Mode AV / S-Video the remote control
  • Samsung 400P | User Manual - Page 88
    Picture PC / BNC /DVI Mode Available Mode : PC / BNC / DVI : AV : S-Video button on the remote control is 'M/B' button. 1) Entertain : High brightness For watching motion pictures such as a the Brightness. : MagicNet Play If you adjust picture using Custom function, MagicBright will turn to
  • Samsung 400P | User Manual - Page 89
    Auto Adjustment Signal Balance Size PIP Picture Image Lock is used to fine- automatically. If you change resolution in the control panel, auto function will be executed. - The direct button on the remote Control AV / S-Video / Component Mode Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 90
    : AV : S-Video : Component OSD Mode Custom Color Tone Size Digital NR Description The Monitor has four automatic picture settings ("Dynamic", " can select "Custom" which automatically recalls your personalized picture settings. - The direct button on the remote control is 'P.MODE' button.
  • Samsung 400P | User Manual - Page 91
    Picture clearer and crisper images. Off On You can turn Film Mode Off/On. The Film Mode feature offers you a theater-quality viewing experience. Off On - Digital Natural Image engine Samsung monitor supports the Video : Component : MagicNet Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 92
    Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Choose Standard for the standard factory settings. 2) Music : Choose Music when watching music videos balance between the left and right speakers. - You can hear the sound button on the remote control is 'BBE manuals search engine
  • Samsung 400P | User Manual - Page 93
    monitor turns on automatically. 4) Off Timer : Use to set the monitor to turn off automatically at a preset time. When you select turning Yes the On Timer or Off Timer when Clock Set is undefined, a guiding Opaque You can change the password. Picture parameters are replaced with the factory default
  • Samsung 400P | User Manual - Page 94
    Launching Video Wall while PIP is running, will switch PIP Off. Video Wall does not operate in MagicNet mode. When the picture is not displayed properly on the screen when setting the graphics card resolution of 10 Hours 2) Interval 3) Second Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 95
    set to 5 seconds. 1~5 Seconds Multi Control Available Mode : PC / BNC / DVI : AV : S-Video : Component : MagicNet OSD Multi Control Description Assigns individual ID to the SET. 1) ID Setup : Assigning 2) ID Input Direct Functions Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 96
    Mode : PC / BNC / DVI : AV : S-Video : Component : MagicNet OSD MAGICNET Description Move to the you can only operate power and lock buttons on the remote control and set. The preset password on the monitor is "0000". 1) Lock On 2) Lock Off MagicNet Downloaded from www.Manualslib.com
  • Samsung 400P | User Manual - Page 97
    (ex: video display). Otherwise, the monitor : execute Device mode. OSD Photo Music Movie Description JPEG, BMP file format is supported. 1) Auto : Automatically picture. 6) Close : Closes Menu for image control. MP3 file format is supported. AVI, MPEG1/2, DivX 4.x, DivX 5.x file format is supported
  • Samsung 400P | User Manual - Page 98
    PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Internet Connects to the If you forget the password, enter Info, 8, 2 and 4 on the remote control to initialize the password. This will reset the previous settings of Setup www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 99
      SyncMaster 400P Input Available Mode : PC / BNC / DVI : AV : S-Video : Component OSD Source List PIP Description Use to select PC, BNC or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is '
  • Samsung 400P | User Manual - Page 100
    will appear in the PIP window. 4) Size - The direct button on the remote control is 'SIZE' button. : Change the Size of the PIP window. If S-Video 6) Component 1) PIP 2) Source 3) Swap 4) Size 5) Position 6) Transparency Picture PC / BNC /DVI Mode Downloaded from www.Manualslib.com manuals
  • Samsung 400P | User Manual - Page 101
    DVI : AV : S-Video : Component OSD MagicBright™ direct button on the remote control is 'M/B' button. 1) Entertain : High brightness For watching motion pictures such as a DVD : Adjust the Brightness. Play If you adjust picture using Custom function, MagicBright will turn to Custom mode
  • Samsung 400P | User Manual - Page 102
    Auto Adjustment Signal Balance Size PIP Picture Image Lock is used to fine- automatically. If you change resolution in the control panel, auto function will be executed. - The direct button on the remote Control AV / S-Video / Component Mode Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 103
    / DVI : AV : S-Video OSD Mode Custom Color Tone Size Digital NR Description The Monitor has four automatic picture settings ("Dynamic", "Standard", can select "Custom" which automatically recalls your personalized picture settings. - The direct button on the remote control is 'P.MODE' button.
  • Samsung 400P | User Manual - Page 104
    Picture clearer and crisper images. Off On You can turn Film Mode Off/On. The Film Mode feature offers you a theater-quality viewing experience. Off On - Digital Natural Image engine Samsung . This monitor supports the DNle Video : Component Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 105
    Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Choose Standard for the standard factory settings. 2) Music : Choose Music when watching music videos balance between the left and right speakers. - You can hear the sound button on the remote control is 'BBE manuals search engine
  • Samsung 400P | User Manual - Page 106
    monitor turns on automatically. 4) Off Timer : Use to set the monitor to turn off automatically at a preset time. When you select turning Yes the On Timer or Off Timer when Clock Set is undefined, a guiding Opaque You can change the password. Picture parameters are replaced with the factory default
  • Samsung 400P | User Manual - Page 107
    functions are not available. Launching Video Wall while PIP is running, will switch PIP Off. When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 2) Interval 3) Second Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 108
    set to 5 seconds. 1~5 Seconds Multi Control Available Mode : PC / BNC / DVI : AV : S-Video : Component OSD Multi Control Description Assigns individual ID to the SET. 1) ID Setup : Assigning distinctive IDs 2) ID Input Direct Functions Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 109
    be locked on. 2) Lock Off : It wil be locked off. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. The preset password on the monitor is "0000". 1) Lock On 2) Lock Off Downloaded from www.Manualslib.com
  • Samsung 400P | User Manual - Page 110
    Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Introduction to MagicNet MagicNet transmits media files (photo, audio and movie files) and office files (PowerPoint, Excel, Word, HTML and PDF files) existing on a server to monitors monitors set to "MagicNet" can
  • Samsung 400P | User Manual - Page 111
    user from freely using MagicNet, by placing limits on the operation of functions according to the account privilege. 3. Update You can update a monitor's MagicNet from the server. However, this function only works when it is connected to a server/monitor ] on the monitor with the remote control, and
  • Samsung 400P | User Manual - Page 112
    Introduction to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Schedule OSD The server program's Power-On option works only if the monitor's power is completely shut off. Please make sure not to
  • Samsung 400P | User Manual - Page 113
    : Displays all files which are registered in the library. z Video File : Classified by actor (actress) z Music File : Classified by musician and album z Image File z Office file :Classified by file type (PowerPoint, Excel, Word, PDF, HTML) Monitor Preview Window This window is used either to preview
  • Samsung 400P | User Manual - Page 114
    and resolution monitoring the information which the monitor user is selecting and playing : This function is disabled. Enlarges/shrinks an image file to fit to the full screen. Double-click the screen to return to the original image size. Play Control Tool Downloaded from www.Manualslib.com manuals
  • Samsung 400P | User Manual - Page 115
    monitoring the information which the monitor user monitoring the information which the monitor user monitor, or from the USB connected to the monitor to register the selected file with the schedule. 1. From the monitor list, select a monitor the monitor, or from the USB connected to the monitor by
  • Samsung 400P | User Manual - Page 116
    Monitor Selecting either all monitors or a specific monitor, where the schedule will be added to, is available from among the monitors , the start time selected by the user is ignored, and the start time is Monitors Connected via the Network Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 117
    automatically be connected to the S2 server. z Setting Up a User Password 1. When selecting a monitor that is currently connected to a server in the monitor our After-Sales Service Center. z Schedule Check 1. Select All Monitors: Checks on all schedules of the registered monitors are available
  • Samsung 400P | User Manual - Page 118
    the Edit menu, you can change the selected file and time. By using the Copy menu, you can select a monitor to copy. 3. The files registered to the library are displayed in a list. Right-clicking a file in the the selected file into a schedule. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 119
    to MagicNet | Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications MDC Adjustment Multiple Display Control (MDC) is a function for easily controlling several monitors from a PC. MDC checks and controls the status
  • Samsung 400P | User Manual - Page 120
    the output source of the monitor can be changed. When selecting the following output source, it will change to the relevant output source. When the relevant device is not connected, a screen with 'Connection required' will appear. z PC z BNC z DVI z AV z S-Video z Component z MagicNet Image 1. Image
  • Samsung 400P | User Manual - Page 121
    PM 2. On Timer Select the time, output source and volume, and click the Apply button. The monitor will turn on with the established source and volume at the established time. When Activated is OFF, message will appear on the monitor. Settings Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 122
    Tint and Color Tone of the monitor. z Contrast z Brightness z Sharpness z Color z Tint z Color Tone 2. Picture PC When the output sources are can control the intensity of the lamp. (Auto/Manual is available. When Auto is running, Manual is off; and when Manual is running, Auto is off.) In Auto mode
  • Samsung 400P | User Manual - Page 123
    z Time 3. Video Wall This offers a function that enables you to use several monitors as one screen. First, select the button that sets the number of monitors to be used will show up in the monitor. z 2*2 z 3*3 z 4*4 z 1*5 z 5*1 z OFF z Format Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 124
    MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Upper Menu Login / Logout Change menu, MDC and Monitor List from among the MagicNet functions. z User Name z Password Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 125
    by the user. When monitor to another is available only on the same monitor (i.e. different hard drives o nthe same monitor). In the Select Monitor list, only My Computer of the server and the monitor that is correctly connected to the server will appear. Downloaded from www.Manualslib.com manuals
  • Samsung 400P | User Manual - Page 126
    appears. You can select a server/monitor from the select list. When selecting a monitor from the left window, you are only allowed to select the same monitor. After selecting the copy target, the program version and the copyright details. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 127
    | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Remote Control Adjustment PHOTO Supported File Formats Image File : JPG, BMP Remote Control z When the it will move to the last page) Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 128
    on the cursor position Play MOVIE Supported File Formats Video File : MPEG1, MPEG2-PS, DIVX4, DIVX5 Remote Control z When the files are selected 5 seconds OFFICE Supported File Formats Office File : Power MS Office(Word, Excel, Power Point), HTML, PDF Remote Control z When manuals search engine
  • Samsung 400P | User Manual - Page 129
    Move to the top Move to the bottom Move to the next page Move to the previous page Exit PDF Move to the upper cell Move to the lower cell Move to the left cell Move to the right cell page Move to the previous page Slideshow Exit Power point Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 130
    mouse cursor to the right Click when the cursor is placed over a link (move to the link) Exit the Internet Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 131
    Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 132
    Schedule OSD | MDC Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Removing Program You can remove MagicNet by using the indicates that program removal is completed. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 133
    Adjustment | Upper Menu | Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Troubleshooting In Preview, the file normal. Please check the monitor for the network connection. Password/Login The password entered by the user when installing MagicNet will become
  • Samsung 400P | User Manual - Page 134
    Remote Control Adjustment | Removing Program | Troubleshooting | Specifications Specifications Supported File Format Spec File Format Resolution Bit rate CBR VBR Audio Sampling rate MPEG1 MPEG2 (PS) Peak bitate - Video 2000 (Service Pack GB. When the user operates MagicNet while
  • Samsung 400P | User Manual - Page 135
    to work properly. : It is recommended that USB devices are purchased after they are tested and confirmed to be compatible. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 136
    following message for a minute; You can choose to change the screen resolution or stay in the current mode during that time. And if the resolution is more than 85Hz, you will see the black screen because the monitor does not support over 85Hz. Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 137
    check if you installed the adapter(video) driver and the monitor driver. 4. Check if the scanning ratio of the video screen is set at 50Hz or 85Hz. (Do not exceed 60Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode
  • Samsung 400P | User Manual - Page 138
    and frequency to the recommended ranges. z Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes. z adjust the brightness and contrast
  • Samsung 400P | User Manual - Page 139
    can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? z Windows XP : Set the resolution at the Control Panel→Appearance and
  • Samsung 400P | User Manual - Page 140
    Model Name SyncMaster 400Pn LCD Panel Size 40 " Diagonal (101 cm) Display area 885.168 mm (H) x 497.664 mm (V) Pixel Pitch 0.648 mm (H) x 0.648 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 70 kHz Vertical 50 ~ 85 Hz Display Color 16.7 M Colors Resolution
  • Samsung 400P | User Manual - Page 141
    computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision
  • Samsung 400P | User Manual - Page 142
    M Not Support Flash, Java Applet, Security Site Ethernet 100 M OS Windows XP Application WMP 9 or later PowerSaver This monitor has a be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the
  • Samsung 400P | User Manual - Page 143
    . Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 144
    Model Name SyncMaster 400P LCD Panel Size 40 " Diagonal (101 cm) Display area 885.168 mm (H) x 497.664 mm (V) Pixel Pitch 0.648 mm (H) x 0.648 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 70 kHz Vertical 50 ~ 85 Hz Display Color 16.7 M Colors Resolution
  • Samsung 400P | User Manual - Page 145
    computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision
  • Samsung 400P | User Manual - Page 146
    adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 147
    .com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 148
    .com/hk http://www.samsung.com/in http://www.samsung.com/id http://www.samsung.com/jp http://www.samsung.com/my http://www.samsung.com/ph http://www.samsung.com/sg http://www.samsung.com/th http://www.samsung.com/tw http://www.samsung.com/vn Downloaded from www.Manualslib.com manuals search engine
  • Samsung 400P | User Manual - Page 149
    same as that used in TVs. Plug & Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function. Resolution The number of
  • Samsung 400P | User Manual - Page 150
    below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. { Resolution: 1360 x 768 { Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology
  • Samsung 400P | User Manual - Page 151
    MÉXICO. S.A. de C.V. Vía Lopez Portillo No. 6, Col. San Fco. Chilpan Tultitlán, Estado de México, C.P. 54940 Tel: 01-55-5747-5100 / 01-800-726-7864 EXPORTADO POR: Samsung Electronics CO.,LTD. 416, Mae tan-3dong, Yeongtong - gu, Suwon City, Gyeonggi-do Korea Downloaded from www.Manualslib.com
  • Samsung 400P | User Manual - Page 152
    LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD Monitor to power off with the PC Display Properties Power Scheme. Suggestions for specific
  • Samsung 400P | User Manual - Page 153
    your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel
  • Samsung 400P | User Manual - Page 154
    responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Install Programs
SyncMaster 4
0
0Pn/4
0
0P
Downloaded from
www.Manualslib.com
manuals search engine