Samsung 500N User Manual (ENGLISH) - Page 211
Enter, On Line/Continue, Dynamic Addressing BOOTP/DHCP, Upper Level, Enter a number between 0
UPC - 635753700107
View all Samsung 500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
An IP address consists of 4 bytes. Enter a number between 0 and 255 for each byte. 12 Press the scroll button ( or ) to enter a number between 0 and 255 and press the Enter button ( ). 13 Repeat Step 12 to complete the address from the 1st byte to the 4th byte. 14 To select other parameters, such as the Subnet Mask or Gateway, press the scroll button ( or ). Press the Enter button ( ). 15 Repeat steps 12 through 13 to configure the other TCP/IP parameters. 16 Press the On Line/Continue button ( ) to return to ready mode. Dynamic Addressing (BOOTP/DHCP) To assign the TCP/IP address automatically by the server, take the following steps: 1 In ready mode press the Menu button ( ) until you see 'Network' on the bottom line of the display. Press the Enter button ( ) to access the menu. 2 Press the Enter button ( ) when 'Config Network' displays on the bottom line. 3 Press the scroll button ( or ) to display 'Yes' and press the Enter button ( ). 4 Press the Upper Level button ( ), then use the scroll button ( ). B 5 Press the Enter button ( ) when 'Config TCP' displays. 6 Press the scroll button ( or ) to display 'Yes' and press the Enter button ( ). USING YOUR PRINTER ON A NETWORK B.9