Samsung 5065W User Manual (user Manual) (ver.1.0) (English) - Page 15
Rear Panel Jacks, VIDEO/AUDIO MONITOR OUTPUT jacks - mode not supported
View all Samsung 5065W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect two different components such as two VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and one set of component video input jacks on the rear panel of your TV. For more information, please see "Connections". Œ ANTENNA terminals Two independent cables or antennas can be connected to these terminals. Use ANT-A and ANT-B terminals to receive a signal from VHF/UHF antennas or your cable system. Use the ANT A-OUT terminal to send the signal being received by the ANT-A terminal out to another component (such as a Cable Set Top Box). The PIP channel can be received only when a signal source is connected to ANT-A. ´ S-VIDEO INPUT jacks Connects an S-Video signal from an S-VHS VCR or DVD player. ˇ VIDEO/AUDIO INPUT jacks(VCR1, VCR2) Connect video/audio signals from external sources, such as a VCR or DVD players. ¨ VIDEO/AUDIO MONITOR OUTPUT jacks Sends a video signal from the TV to an external source, such as a VCR. Note: Monitor Out is available only in RF, Video and S-Video modes. ˆ Component1 jacks (Y, Pb, Pr, L, R) Use these jacks to connect the component video/audio signals from a DVD player when using the component video input jacks. Note: Only 480i and 408p formats are supported. Ø Component 2, 3 jacks (Y, Pb, Pr, L, R) Receives the DTV video/audio signals from a set top box. Note: Only 480p, 720p and 1080i formats are supported. ∏ PC AUDIO INPUT jacks Connect these to the audio-output jacks on your PC. " DVI (Digital Video Interface) jack Receives the digital signals from a set top box or PC etc. ' RS-232C jack ˝ PC VIDEO INPUT jack Connect to the video output port on your PC. 15