Samsung A300 User Manual (ENGLISH) - Page 12
Connecting a VCR, Video Connection
View all Samsung A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV. ANT IN 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. TV Rear Panel 4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] jack on the TV. VCR Rear Panel 5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV. 5 Audio Cable (Not supplied) If you have a "mono" (non-stereo) VCR, use a 4 Video Cable (Not supplied) Y-connector (not supplied) to hook up to the right and 3 RF Cable (Not supplied) left audio input jacks of the TV. If your VCRis stereo, you mustm connect two cables. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). English - 10