Samsung A503 User Manual - Page 34

OSD(On Screen Display) information ■In any mode with the exception of VOICE RECORDING mode, you can check the recording OSD INFORMATION status in the LCD monitor. ■Idle mode : If you select the [SAVE MODE] and the FULL OSD BASIC OSD SAVE MODE camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. - To use the camera again, press any of the camera buttons except the power button. - If there is no operation during the specified time, the camera power will be turned off automatically to save battery life. Refer to page 50 for more information about the auto power off function. [Full information mode] [Basic information mode] Starting play mode ■ If the memory card is inserted in the camera, all the camera functions apply only to the memory card. ■ If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ■ If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. ■ You can turn the power on with the play mode button. The camera is turned on in play mode. Press the play mode button again to switch to shooting mode. ■ You can set up the PLAY mode function by using the camera buttons and LCD monitor. ● Playing back a still image 1. Select the PLAY mode by pressing the play mode button ( ). 2. The last image stored on the memory is displayed on the LCD monitor. 3. Select an image that you want to play back by pressing the LEFT/ RIGHT button. ※ Press and hold the Left or Right button to fast forward the images played. 《33》