Samsung BD P2500 User Manual (ENGLISH) - Page 38

audio setup Speaker Setup If you have connected this player to an Amp/Receiver or Home theater via the 7.1 channel Analog outputs you need to set the Speaker Options for the best sound. To setup, follow steps 1 to 3 in "Setting up the Audio Options" on page 36. No Disc 4. Press the ▲▼ buttons to select Speaker Setup, then press the ENTER or ▶ button. 5. Press the ▲▼ buttons to select the desired Speaker, then press the ENTER button to change speaker setup. Disclaimer System Setup Language Setup Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup 6. When done, use the ▲▼ buttons to select Save, then press the ENTER button. If you don't want to save your settings, use the buttons to select Cancel, then press the ENTER button. Disclaimer System Setup Language Setup PCM Down Sampling : On Dynamic Compression : On Setup Audio Setup Speaker Setup No Disc Display Setup HDMI Setup Network Setup Parental Setup Speaker Setup Front (L, R) Center (C) Surround (LS, RS) Subwoofer (LFE) Surround Back (LSB, RSB) Large, Small Large, Small, None Large, Small, None On, Off Large, Small, None PCM Down Sampling : On Disclaimer Language Setup Speaker Setup Dynamic Compression : On Setup Audio Setup Speaker Setup No Disc Front : Small Display Setup LFE : On Network Setup Center Surround : Small : Small Parental Setup Surround Back : Small a Test Tone Save Cancel s Select r Return Speaker ~ Large : Delivers full bandwidth sound with bass below 100 Hz. ~ Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the Front Speaker. ~ None : Select to disable the speakers. Subwoofer Speaker ~ On : Select to use the subwoofer speaker. ~ Off : Select to disable the subwoofer speaker. (This option can only be selected when the Front (L+R) speakers are set to Large.) Press the RED(A) button ~ A test tone will be sent to L ; C ; R ; RS ; RSB ; LSB ; LS ; LFE in order so you can make sure the speakers are set up correctly. ~ To end the test tone, press the RED (A) button again. ~ The test tone can only be activated when no discs are in the unit. ~ The test tone outputs through the 7.1 channel analog outputs only. M ` Press the RETURN to return to the previous menu. 38_ audio setup