Samsung BL1050 User Manual - Page 46

Display ( " ) Start up image You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. - Sub menus : [Off], [LOGO], [User Image] - Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode. - The start-up image will not be deleted by [Delete] or [Format] menu. - The User images will be deleted by [Reset] menu. DISPLAY Language Date&Time Start Image LCD Bright Quick View LCD Save  Back    Off     OK Set Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. - Sub menus [Off] : The quick view function can't be activated. [0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time. DISPLAY Language Date&Time Start Image LCD Bright Quick View LCD Save  Back    Off  0.5 sec 1 sec  3 sec OK Set     LCD brightness You can adjust the LCD brightness. - Sub menus : [Auto], [Dark], [Normal], [Bright] DISPLAY Language Date&Time Start Image LCD Bright Quick View LCD Save  Back    Auto Dark  Normal  Bright OK Set LCD save If you set the [LCD save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically. - Sub menus [Off] : The LCD monitor will not be turned off. [On] : If the camera isn't operated during the specified time (about 30 SEC.), the camera power will be idle (Camera status lamp: Blinking) automatically. DISPLAY Language Date&Time Start Image LCD Bright Quick View LCD Save  Back      Off On OK Set 45