Samsung CL-21Z43MQ User Manual (user Manual) (ver.1.0) (English) - Page 4

Channel - Memorizing the Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: "Air/CATV", "Auto Program" and "Add/Delete".  Air/CATV Channel Before your TV can begin Auto Program ► memorizing the available Add/Delete : Deleted ► channels, you must specify Air/CATV : Air the type of signal source Name : ---- that is connected to the TV (i.e., an antenna or a cable Move Adjust Skip system). Select "Air", "STD", "HRC", or "IRC" by pressing the ◄ or ► button.  Auto Program All available channels are automatically stored in memory when channels are selected by the direct tuning function. Press the ENTER button at any time to interrupt the memorization process. Auto Program Air 7 Start Enter Return  Add/Delete You can add or delete a channel to display the channels you want only. To use the "Add/Delete" function, first run Auto Program. Auto Program Add/Delete Air/CATV Name Channel ► : DDAeedlldeeetteeddd :Air : ---- Move Enter Return Select "Deleted" or "Added" by pressing the ▲ or ▼ button. Channel - Name Use this feature to assign an easy-to-remember label to any channel (i.e., "CBS", "ESPN", "PBS2", "CNN1", etc.). A label consists of four fields, where each field is a letter (A~Z), a number (0~9), a blank, or -. When the INFO button is pressed, the channel label will appear next to the channel number. Auto Program Add/Delete Air/CATV Name Channel ► : Deleted ► : Air : A---- Move Adjust Return ➢ You cannot select "Name" in the AV mode. Setup - Time  Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Time Clock 12 : 00 am On Timer -- : -- am Off Off Timer -- : -- am Off Sleep Timer : Off On Timer Volume : 10 Move Adjust Return  On Timer / Off Timer You can set the On/Off timers so that the TV will switch on or off automatically at the time you select. ➢ You must set the clock first.  Sleep Timer You can select a time period of between 30 and 180 minutes after which the TV automatically switches to standby mode. ➢ Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from "30 Min." to "180 Min.").  On Timer Volume The preferred volume can be set for when the timer automatically turns on the TV. ☛ Auto Power Off When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating or leakages, which may occur if a TV is on for too long. English - 4