Samsung CL-29T21FQ User Manual (user Manual) (ver.1.0) (English) - Page 14
Connecting to a Cable Box that Descrambles Some Channels, After you've made this connection
View all Samsung CL-29T21FQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
INSTALLATION Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.) 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box. ˇ This terminal might be labelled "ANT IN", "VHF IN" or simply, "IN". 2 Connect this cable to a twoway splitter. Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box. Incoming Cable Splitter Cable Box 3 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch. Incoming Cable Splitter Cable Box RF (A/B) Switch 4 Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch. Incoming Cable Splitter Cable Box RF (A/B) Switch 5 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the "VHF/UHF" terminal on the rear panel. Incoming Cable Splitter Cable Box RF (A/B) Switch TV Rear After you've made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.) English - 14