Samsung DV210AGW/XAA (English) - Page 23
Rack Dry Optional Part
View all Samsung DV210AGW/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
02 operating Instructions, tips RACK DRY (OPTIONAL PART) Installing the drying rack 1. Open the Dryer door. 2. Position the drying rack in the tumbler, placing the front lip of the drying rack on the top of the lint filter. 3. Place the rear legs in the two recessed areas of the dryer's back wall, then push down the middle of the drying rack to fix. 4. Place the items to be dried on the rack, leaving space between them so air can circulate. 5. Close the Dryer door. 6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items. Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed. SUGGESTED ITEMS SUGGESTED TEMP. SETTINGS Washable sweaters (block to shape and lay flat on rack) Stuffed toys (cotton or polyester fiberfilled) Stuffed toys (foam or rubber-filled) Low or Extra Low Low or Extra Low Air Fluff Foam rubber pillows Air Fluff Sneakers Air Fluff or Heat (Extra Low) Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and WARNING lead to a fire hazard. Drying Rack is not supplied in this model. The Drying Rack is optional. You can purchase it through a service center. (Part code : DC61-02773A) DV220AE-02810A-03_EN.indd 23 operating Instructions, tips _23 2010-06-28 ¿ÀÈÄ 5:53:36