Samsung DV393GTPARA/A1 Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 4

ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. Continuous Run Mode Power On state (Normal user mode) Mixed Load Bell +Dry Level(DV405,DV395,DV393) or Wrinkle Prevent + Time(DV231,DV365) 7 SEC Continuous Run Mode How to enter: - Press Mixed Load Bell +Dry Level(DV405, DV395, DV393) or Wrinkle Prevent + Time(DV231, DV365) for 7 sec during Power On State (normal user mode). - Once in Continuous Run Mode, display "cc" for 1 sec and finished cycle count for 1 sec and the remaining time for 1 sec in turns. - The previous cycle will restart during Continuous Run Mode until the mode is deactivated. - During Continuous Run Mode, press Mixed Load Bell +Dry Level(DV405,DV395, DV393) or Wrinkle Prevent + Time(DV231, DV365) for 7 seconds to go back to normal user mode. Data Display Mode (DV405,DV395, DV393 only) How to Enter: - With Power On, press AdjustUp Key + AdjsutDown Key for 7 seconds until it sends out a beeping sound . - If not pressed any keys for 5 minutes, it will be set back from Data Display Mode - If pressing AdjustUp Key in this mode, Display Mode will be incresed. - If pressing AdjustDown Key in this mode, Display Mode will be decresed. Definition of Data Display Mode: - Display Mode 1 : Temperature data - Display Mode 2 : Average Touch Sensor data for 1 minute - Display Mode 3 : Average Temperature data for 1 minute 4 (Technical)DV405-02365H-02_EN.indd 4 2012-06-19 �� 1:25:53