Samsung DV405GTPAWR/AA Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 3

ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. TEST MODE Service Mode (DV405, DV395, DV393 only) How to enter: - To enter Service Mode , press Mixed Load Bell + Temp. Keys 3 seconds in normal mode until it sends out a beeping sound. - If pressing Mixed Load Bell + Temp. Keys in Service mode , it will return Normal mode. - Even though entering Service mode, the operating cycle will not be influenced. DR Ready Modem Wire Test(DV431AS* only) How to enter: - After entering Service Mode, press the Wrinkle Prevent button to start the Wire Test. - During the test, "----" is displayed. - If the test result is normal after the test, "SG" is displayed. - If a problem occurs, the "AE3" error code is displayed. Touch Sensor Data Display Mode Definition of Touch Sensor Data Display Mode: - This mode is default mode of entering service mode. How to enter: - With Power On pressing Mixed Load Bell +Temp(DV405,DV395, DV393) or Wrinkle Prevent + Temp(DV231, DV365) for 3 seconds. - This action will put the dryer into sensor bar touch data mode - Dryer will display Sensor Bar data. Cycle Count Mode Definition of Cycle Count Mode: - This mode is to bring up the total number of cycles that User have carried out. How to enter: - Press the Mixed Load Bell(DV405,DV395, DV393) orTime(DV231,DV365) key in Service Mode. Software Revision Mode Definition of Software Revision Mode: - It is to retrieve its software version How to enter: At Service Mode, press Temp until it sends out a beeping sound ex) In case of "U1 05", U1 means major version "U1", 05 means minor version "05". - If press Temp key In Software Version Mode, it will return Service Mode. 3 (Technical)DV405-02365H-02_EN.indd 3 2012-06-19 �� 1:25:53