Samsung DV435ETGJRA/A1 Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 3

ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. TEST MODE Service Mode How to enter: - To enter Service Mode , press Wrinkle Prevent + Temp. Keys 3 seconds in normal mode until it sends out a beeping sound. - If pressing Wrinkle Prevent + Temp. Keys in Service mode , it will return Normal mode. - Even though entering Service mode, the operating cycle will not be influenced. Touch Sensor Data Display Mode Definition of Touch Sensor Data Display Mode: - This mode is default mode of entering service mode. How to enter: - Once the unit enters service mode, the mode changes to touch sensor display mode. - This action will put the dryer into sensor bar touch data mode - Dryer will display Sensor Bar data. Cycle Count Mode Definition of Cycle Count Mode: - This mode is to bring up the total number of cycles that User have carried out. How to enter: - Press the Mixed loaded bell key in Service Mode. Software Revision Mode Definition of Software Revision Mode: - It is to retrieve its software version How to enter: At Service Mode, press Temp until it sends out a beeping sound ex) In case of "U1 05", U1 means major version "U1", 05 means minor version "05". - If press Temp key In Software Version Mode, it will return Service Mode. Data Display Mode How to Enter: - If you press the time button in service mode, the mode changes to data display mode. - If pressing AdjustUp Key in this mode, Display Mode will be incresed. - If pressing AdjustDown Key in this mode, Display Mode will be decresed. Definition of Data Display Mode: - Display Mode 1 : Temperature data - Display Mode 2 : Average Touch Sensor data for 1 minute - Display Mode 3 : Average Temperature data for 1 minute 3 Technical_information-02835E_EN.indd 3 2012-05-16 �� 5:10:01