Samsung DVDVR375 User Manual Ver.2.0 (English) - Page 34

system setup Scan Audio (DVDs only) • On : Outputs audio signals during FF1 fast-forward of a DVD disc with Dolby Digital soundtracks. • Off : Turns off the function. No sound is output during FF1 fast-forward. M  Sound will be interrupted during Scan Audio.  If the audio format is LPCM, this function is not supported. Audio Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM Digital Out Downmix Audio DRC Audio(HDMI) Scan Audio Surround DV/D8 Audio Input AV Audio Input : Dolby Surround : Standard : Auto : O✔n On : Off Off : Stereo1 : Stereo > Move sEnter rReturn eExit Surround Turns on the surround function to create virtual rear speakers from a stereo TV or two separate front speakers. • Off : No surround effect • Surround 1 : Creates one set of virtual surround speakers. • Surround 2 : Creates two sets of virtual surround speakers. • Surround 3 : Creates three sets of virtual surround speakers. M  When the playback signal does not contain surround audio signals, the surround effects will not be heard. Audio Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM Digital Out Downmix Audio DRC Audio(HDMI) Scan Audio Surround DV/D8 Audio Input AV Audio Input : Dolby Surround : Standard : Auto : O✔n Off : Off Surround1 : SterSeuor1round2 : SterSeuorround3  When you select one of the surround modes, turn off the surround settings of the connected TV or amplifier (receiver). > Move sEnter rReturn eExit DV/D8 Audio Input • Stereo 1 : Records original sound only. Normally select this when dubbing a DV format tape from a camcorder. • Stereo 2 : Records additional audio only. • Mix : Records both original and additional sounds. M  Select "Stereo 2" or "Mix" if you have added a second audio channel when recording with your camcorder. Audio Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM Digital Out Downmix Audio DRC Audio(HDMI) Scan Audio Surround DV/D8 Audio Input AV Audio Input : Dolby Surround : Standard : Auto : On : O✔ff Stereo1 : SterSetoe1reo2 : SterMeiox > Move sEnter rReturn eExit AV Audio Input When recording from equipment connected to the AV input jacks to a DVD disc in this recorder, select AV input audio. • Stereo : Records stereo sound only. • Main/Sub : You can record audio from two different sources on the left and right channels with DVD-RWs/(VR mode) and DVD-Rs/(VR mode). You can select either the Main(left) or Sub(right) soundtrack when playing back. Please refer to the AUDIO button. (See page 16) Audio Title List Timer Edit Dubbing Disc Setting Setup 12:00 AM Digital Out Downmix Audio DRC Audio(HDMI) Scan Audio Surround DV/D8 Audio Input AV Audio Input : Dolby Surround : Standard : Auto : On : Off : S✔terSetoe1reo : SterMeaoin/Sub > Move sEnter rReturn eExit 34_ system setup