Samsung DW80B7070AP/AA User Manual - Page 30
SmartDry Hi/Lo, SmartDry, SmartDry Low, Smart Control, SmartThings
View all Samsung DW80B7070AP/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Operations Operations 07 SmartDry Hi/Lo 08 Smart Control 09 Display • Hi - Press SmartDry Hi/Lo once to select "SmartDry High". This option increases the rinsing temperature up to 73 ˚C and enhances the drying performance compared to "SmartDry Low". • Lo - Press SmartDry Hi/Lo twice to select "SmartDry Low". This option reinforces the drying performance inside the dishwasher through the circulation of heated air. And it increases the cycle time accordingly. NOTE "SmartDry Low" is a recommended drying option by the manufacturer. • Off - Press SmartDry Hi/Lo three times to exit. • SmartDry Low condition is the recommended for regular use to completely wash a full load of normally soiled dishes. CAUTION • The dishwasher stays in a high temperature inside during the SmartDry process. Do not open the door or touch any of loaded dishes or the hot air outlet of SmartDry in the lower right corner. • Take caution not to clog the hot air outlet of SmartDry with dishes. Clogged outlet will not facilitate heat circulation. • Keep plastic dishes away from the hot air outlet of SmartDry as they are vulnerable to heat. • To enhance the drying performance, it is recommended to use rinse for the SmartDry cycle. You can monitor and control the dishwasher remotely through a Wi-Fi connection. To connect the dishwasher to your smart phone for the first time, press and hold Smart Control. For more information, see the "SmartThings" section on page 37. Displays information about the current cycle including the cycle time, remaining time, Delay Start settings, and other cycle-specific information. If a problem occurs during operation, an information code appears with a warning sound. Refer to the information codes on page 52. 30 English DW7000B_DW80B7070_AA_DD68-00243A-01_EN_FULL.indd 30 2023-04-26 12:24:22