Samsung GV-MDC User Manual - Page 5

Installation Notes on installation and usage 1. Users should not disassemble the camera. 2.Always handle the camera with care. Please avoid mechanical shock or vibration and take care to prevent damage or scratching to the camera bubble due to careless storage and handling. 3. Please do not install the camera in places exposed to rain or highly humid areas. Do not operate the camera in wet environments. 4. Do not clean the camera body with strong abrasives or soaps. When the camera becomes dirty, clean it with a dry cloth. Make sure to use a clean cloth to clean lens and bubble dome cover. 5. Please keep the camera in a cool area that is not exposed to direct sunlight. Failing to do so could cause damage to the camera. Camera Installation 1. Installers should hold the camera body with one hand and turn the bubble counterclockwise with other hand in order to disassemble it. 2. Using the supplied screws, fix dome base to mounting surface. Loosen the internal panning screw to enable 120º of panning adjustment. Aim the camera to the desired angle and tighten screws. 3.Tilt camera by loosening the visible tilt screws. 4. Connect the BNC cable to the video cable connector attached to the camera and connect the other end to the video input terminal. 5. Connect the power adaptor. Connect the power cable connection that is attached on the dome camera. 6. Reattach the camera bubble to the mounted camera base SAMSUNG | GVI Security • Toll Free: 888-595-2288 • Fax: 972-245-7333 This product specifications and manual are also available in pdf format at www.gviss.com This information is subject to change without notice • v5.8.09