Samsung HL61A750A1FXZA User Manual - Page 11

t AN ,°

Get Samsung HL61A750A1FXZA PDF manuals and user guides View all Samsung HL61A750A1FXZA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the side of the TV. Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connectin_ to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT" 2 Connect the other end of this cable to the ANT IN terminal on the side of the TV ANTIN ANT OUT_= to a Cable Box that Des€rambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.) Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. ;'_ This terminal might be labeled "ANT IN", "VHF IN' or simply, "INL t AN ,° 2 Connect this cable to a two-way splitter. 3 Connect anAntenna cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box. Incoming cable 4 Connect an Antenna cable between the ANT OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch. Incoming cable 5 Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch. cable 6 Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminai on the side of the TV. -'=___ Incoming cable Splitter Splitter Cable Box Splitter - . r _ Cable Box RF (A/B) Switch Cable BOX Switch TV Side . _. _- ,...... cable Splitter _ Cable BOX RF (A/B) / Switch After you have made this connection, set the A/B switch to the "A' position for normal viewing. Set the A/B switch to the "B' position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Connecting Cable TV
To
connect
to a cable TV system, follow
the
instructions
below.
Cable
without
a
Cable
Box
1
Plug the incoming cable into
the
ANT IN
terminal
on the side of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connectin_
to a
Cable
Box that
Descrambles
All Channels
1
Find the cable that is connected to the ANT OUT terminal on your cable box
This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT"
2
Connect the other end of this cable to the ANT IN terminal on the side of the TV
ANTIN
ANT
OUT_=
to
a
Cable
Box that
Des€rambles
Some
Channels
If your cable box descrambles
only
some channels
(such
as
premium
channels),
follow
the instructions
below. You will
need
a two-way
splitter, an RF (A/B) switch,
and four lengths
of Antenna cable. (These items are available at most electronics
stores.)
Find and disconnect
the
cable that is connected
to the ANT IN terminal on your cable box.
;'_
This terminal might be labeled "ANT IN",
"VHF
IN' or simply, "INL
t AN ,°
2
Connect this cable to a two-way splitter.
3
Connect anAntenna cable between an
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
4
Connect an Antenna cable between the ANT
OUT terminal on the cable box and the B-IN
terminal on the RF(A/B) switch.
5
Connect another cable between the other OUT
terminal on the splitter and the A-IN terminal on
the RF (A/B) switch.
6
Connect the last Antenna cable between the
OUT terminal on the RF (A/B) switch and the
ANT IN terminai on the side of the TV.
Incoming
cable
Splitter
Incoming
cable
Splitter
Cable
Box
Incoming
cable
Splitter
Cable
Box
RF (A/B)
Switch
-
cable
.
r
Cable
BOX
Switch
TV
Side
-'=___
_
. _.
_-
,
......
cable
Splitter
_
RF (A/B)
/
Cable
BOX
Switch
After you have made this connection, set the A/B switch to the
"A'
position for normal viewing. Set the A/B switch to the
"B'
position to
view scrambled channels. (When you set the A/B switch to
"B",
you will need to tune your TV to the cable box's output channel, which
is usually channel 3 or 4.)