Samsung HLR4677W Quick Guide (ENGLISH) - Page 12

4 Press the ... or † button to select the Antenna connection, then press the ENTER button. ● Air : "Air" antenna signal Cable : "Cable" antenna signal Air+Cable : "Air" and "Cable" antenna signals ● If the CableCARD is inserted into the "CableCARD" slot on the rear panel, "Cable" and "Air+Cable" are not available. Input Picture Sound Channel Setup Guide Auto Program Select the antennas to memorize. Air Start Cable Start Air+Cable Start Move Enter Return When selecting Cable TV system: Press the ENTER button to start the auto program. By default, the cable TV system is set to "STD". If you want to select another type of cable system, press the œ button and use the ... or † button to select one of Analog or Digital "STD", "HRC" and "IRC". Press the ENTER button. ● STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. 5 Press the √ button to select "Start", then press the ENTER button to start the auto program. The TV begins memorizing all available stations. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. ● The TV must be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control. Input Picture Sound Channel Setup Guide Auto Program Select the cable system. Analog STD HRC IRC Digital STD HRC IRC ✔ Start ✔ Move Enter Return Auto Program Auto Program in progress Cable Channel 26 Stop Enter Return Input Picture Sound Channel Setup Guide Auto Program Select the cable system. Analog STD HRC IRC Digital STD HRC IRC Start ✔ ✔ Move Enter Return English-12