Samsung HP-P5091 Quick Guide (easy Manual) (ver.1.0) (English) - Page 10
Troubleshooting
View all Samsung HP-P5091 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. WIRELESS HOME AV CENTER Problem Poor picture quality Poor sound quality or no sound. No picture or sound. No color or wrong colors. Remote control failure. A/V Center won't turn on. No output from the TV OUT Video and audio breakups Possible Solution Try another channel. Adjust the antenna. Check all wire connections. Try another channel. Adjust the antenna. Make sure the "MUTE" button is off. Try another channel. Make sure the Set-Top Box is plugged in. Check the antenna connections. Make sure the program is broadcast in color. Press the STB button to enter the DTV mode. Check for batteries. Make sure the wall outlet is working. Make sure the remote has batteries. Check if the power plug is connected. No Video output from the external input source is available on this terminal. Available input sources are AIR and Cable. Audio output for all input sources is available. This product adopts 5GHz wireless LAN technology. Since wave length of signal is very short, signal cannot go through concrete wall. This causes video and audio breakups. For a better reception, PDP needs a line of sight to the WIRELESS HOME AV CENTER. PDP Problem Possible Solution Poor picture. Check all wire connections. Your remote control does not operate the PDP. Press the "MODE" button to put your remote control in the "TV" mode. The PDP won't turn on. Check if the power plug is connected. There is no screen image. Check to see that both the PDP and the source are plugged in and turned on. The image is too light or too dark. Adjust the Brightness or Contrast settings. The image is too large or too small. Adjust the Size settings. If the message "No Wireless Signal or Please Check WIRELESS HOME AV CENTER Power" appears: This message is displayed when the communication between the PDP and the WIRELESS HOME AV CENTER fails. Check whether the WIRELESS HOME AV CENTER's Power is turned ON. Check whether the Wireless LED on the front panel is lit Green (If not, move the WIRELESS HOME AV CENTER to a location where the Green LED lights up). 10