Samsung HW-D7000 User Manual (user Manual) (ver.1.0) (English) - Page 44
Crossover Frequency, MP3 Enhancer, Smart Volume
UPC - 036725617582
View all Samsung HW-D7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Setup ✎ NOTE Channel status displays are dependent on the speaker configuration. SFE mode works with 2-ch signals. If Dolby Pro Logic IIz is set to On, Dolby true HD, Dolby plus, DTS-HD Master Audio, SFE and NE0:6 will be output 5.1 channel. DPL IIx • Off : Dolby Digital Surround EX / DTS ES decoder will not be used for playback. • On : Dolby Digital or DTS signal will be played in 6.1 / 7.1 channel using Dolby Digital Surround EX / DTS ES decoder. ✎ NOTE You cannot use DTS-ES without surround back speakers connected. • Panorama : You can set it On or Off. (This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.) • Dimension : You can set from -7 to +7. (Incrementally adjusts the sound field (DSP)from the front or surround.) • Center Width : You can set from 0 to 7. (This sets the width of the center sound image. The higher the setting, the less sound comes from the center speaker.) Extended Surround (EX/ES) When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source is input, and does not work with L.PCM and Dolby Digital 2 channel sources. • Auto : If the unit receives an audio signal that it can recognize, it will select an optimal decoder for playback in 6.1/7.1 channels. If the amplifier does not recognize the audio signal, it will not play in 6.1/7.1 channel automatically. DTS Neo:6 Center Image You can play back 2 channel sound over 6.1 channels when enjoying music or a movie. • You can set Center Image from 0 to 5. This parameter adjusts the height of the center image through the front and center speakers. "0" is the lowest while "5" is the highest. ✎ NOTE NEO:6 mode cannot be used with Dolby Digital, Dolly Digital Plus, Dolby True HD, DTS, DTS-HD Master Audio. Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. Crossover Frequency Select the crossover frequency for the best bass response in your speakers. • You can set frequencies 60, 80, 100,120, 150, 180 or 200(Hz). MP3 Enhancer This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound (24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit). Smart Volume This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. 44 English