Samsung HW-K450 User Manual - Page 21
Connecting To A Tv - setup
View all Samsung HW-K450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ENG CONNECTING TO A TV CONNECTIONS ●● Important: Before you begin, put the battery into the remote. See page 12 for instructions. CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE Optical Cable OPTICAL OUT DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN (OPTICAL) DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) AUX IN Wi-Fi SETUP SPK ADD HDMI IN HDMI OUT (TV-ARC) DC 24V 1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable. 2. Press the (Source) button on the right side of the Soundbar or the SOURCE button on the remote control to select the D.IN mode. ++Auto Power Link If you have connected the main unit to a TV with a digital optical cable, you can set Auto Power Link function to ON and have the Soundbar turn on automatically when you turn the TV on. 1. Connect the Soundbar and a TV with a digital optical cable. 2. Press the (Source) button on the main unit's right side or the SOURCE button on the remote control to select the D.IN mode. 3. Press and hold the button on the remote control for about 5 seconds to toggle the Auto Power Link function on and off. ●● Depending on the connected device, Auto Power Link may not function. ●● This function is only available in the D.IN mode. 21