Samsung LN-R1550 Quick Guide (easy Manual) (ver.1.0) (English) - Page 6
Connecting a VCR
View all Samsung LN-R1550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
01 BN68-00816A-00.qxd 2/1/05 4:14 PM Page 10 I N S TA L L AT I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-9). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Incoming Cable or Antenna VCR Rear Panel 3 Connect an RF cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. VCR Rear Panel TV Rear Panel RF Cable An RF cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect an audio cable between the AUDIO OUT jacks on the VCR and the AV IN [L-AUDIO-R] jacks on the TV. VCR Rear Panel TV Rear Panel Audio Cable If you have a "mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. English-6