Samsung LN-R3255W Quick Guide (easy Manual) (ver.1.0) (English) - Page 9
Adjusting the Volume, Viewing the Display, Plug and Play Feature, Using MUTE button
View all Samsung LN-R3255W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Adjusting the Volume 1. Press the VOL or VOL button to increase or decrease the volume. Using MUTE button: At any time, you can temporarily cut off the sound using the MUTE button. 1. Press MUTE and the sound cuts off. The word "Mute" will appear in the lower-left corner of the screen. 2. To turn mute off, press the MUTE button again, or simply press the VOL or VOL button. Viewing the Display Press the INFO button on the remote control to view current channel and the status of certain audio-video settings. The on-screen displays disappear after about ten seconds. Press the button once more or wait approximately 10 seconds and it disappears automatically. Plug and Play Feature When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. 1. Press the POWER button on the remote control. The message "Plug & Play" is displayed. 2. Select the appropriate language by pressing the or button. Press the ENTER button to confirm your choice. 3. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button. Please check that the antenna cable is connected correctly. 4. Press the or button to select "Air", "STD", "HRC", or "IRC", then press the ENTER button. 5. Press the ENTER button to select "Start". The channel search will start and end automatically. After all the available channels are stored, the "Clock Set" menu appears. Press the ENTER button at any time to interrupt the memorization process. 6. Press the ENTER button. Press the or button to move to the "Hour", "Minute" or "am/pm". Set the "Hour", "Minute" or "am/pm" by pressing the or button. 7. Press the ENTER button to confirm your setting. The message "Enjoy your watching." is displayed. Language: Select your language. Air/Cable: Select your local cable company TV system. Auto Program: Selects between terrestrial antenna connection or your local cable company TV system. The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Clock Set: Sets the current time for the TV clock. You can also set the hour and minute by pressing the number buttons on the remote control. If you want to reset this feature... 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER 2. Press the ENTER button to select "Plug & Play". 3. This will change or reset the settings. button. English-7