Samsung LN19C450 User Manual - Page 33
Solutions and Explanations
View all Samsung LN19C450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
05 Other Information Issues Solutions and Explanations No Picture, No Video The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to 'Remote control does not work' below. The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Setup menu. (P. 17) • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV. • When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal. There is no picture/video. • Check cable connections. (remove and reconnect all cables connected to the TV and external devices). • Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. • Be sure to select the TV's correct source by pressing the SOURCE button on the remote control. • Reboot the connected device by reconnecting the device's power cable. RF(Cable/Antenna) Connection The TV is not receiving all channels. • Make sure the coaxial cable is connected securely. • Please try Auto Program to add available channels to the channel list. go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and IRC) (P. 12) • Verify the Antenna is positioned correctly. No Caption on digital channels. • Check Caption Setup menu. Try changing Caption Mode Service 1 to CC1. (P. 19) • Some channels may not have caption data. The picture is distorted: macroblock, error, small block, dots, pixelization. • Compression of video contents may cause picture distortion. especially on fast moving pictures such as sports and action movies. • A low signal can cause picture distortion. This is not a TV problem. PC Connection A "Not Supported Mode" message appears. • Set your PC's output resolution so it matches the resolutions supported by the TV. "PC" is always shown on the source list, • This is normal; "PC" is always shown on the source list, regardless of whether a PC is even if a PC is not connected. connected. The video is OK but there is no audio. • If you are using a HDMI connection, check the audio output setting on your PC. 33 English