Samsung LN37A330J1D Quick Guide (ENGLISH) - Page 5

Connecting a VCR Video Connection TV Rear Panel VCR Rear Panel 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna 2 to the ANT IN terminal on the back of the VCR. 3 Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. 4 Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] jack on the TV. 3 RF Cable (Not supplied) 4 Video Cable (Not supplied) 5 Audio Cable (Not supplied) Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. 5 Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [RAUDIO-L] jacks on the TV. ➣ If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables. ➣ Each VCR has a different back panel configuration. ➣ When connecting a VCR, match the color of the connection terminal to the cable. ➣ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). English-