Samsung LN40A750R1F Quick Guide (ENGLISH) - Page 8

Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Viewing the Menus 4 When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the or ► to select the correct analog signal cable system source among "STD", "HRC", and "IRC". Press the ▲ or ▼ button to select "Start", then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital. Auto Program Selects the cable system. Analog STD HRC IRC Digital STD HRC IRC Start Move Enter Return 1 With the power on, press the MENU button. The main menu appears on the screen. The menu's left side has icons: Picture, Sound, Channel, Setup, Input, Application. 2 Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon's sub-menu. Press the EXIT button to exit. ➣ To move to a lower menu, turn the wheel clockwise when the menu Display is displayed. To move to a higher menu, turn the wheel counterclockwise. ➣ The on-screen menus disappear from the screen after about one minute. Storing Channels in Memory (Automatic Method) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2 Press the ▲ or ▼ button to select "Auto Program", then press the ENTER button. 5 The TV begins memorizing all available stations. Press the EXIT button to exit. Auto Program Auto Program in Progress. DTV Cable : 12 Cable : 32 Cable 38 50% Stop Enter Return Auto Program Removing scrambled channel. DTV Cable : 16 Cable : 45 DTV Cable 41 77% Stop Enter Return ➣ After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. Press the ▲ or ▼ button to select the antenna 3 connection, then press the ENTER button. Auto Program Select the Antenna source to memorize. Air Start Cable Start Auto Start Move Enter Return To Stop the Auto Program Function Press the MENU button while the Auto Program function is being executed. You can also press the ENTER button to stop the setup. Checking to see if Channels were Stored in Memory Press the CH button. Only the channels stored in memory will be selected (in order). Selecting the antennas • Air: "Air" antenna signal. • Cable: "Cable" antenna signal. • Auto: "Air" and "Cable" antenna signals. English-