Samsung ME16K3000A Installation Guide - Page 10

D. Aligning The Wall Plate

Get Samsung ME16K3000A PDF manuals and user guides View all Samsung ME16K3000A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Step-by-step installation guide D. ALIGNING THE WALL PLATE Hole A Centerline notches Draw a Vertical Line on Wall from Center of Top Cabinet Horizontal Line Area E CL Hole C Hole B Horizontal Line Draw a Horizontal line on wall from bottom of "Rear Wall Template˝. CAUTION: Wear gloves to avoid cutting fingers on sharp edges. 1. Draw a Vertical line on the wall at the center of the 30˝ wide space. 2. Draw a Horizontal line on the wall at the bottom of "Rear Wall Template". 3. Drill ⅝˝ holes for toggle bolts on 3 locations (Hole A, Hole B, Hole C) but if the location of hole is same as that of stud, drill a 3/16˝ hole for wood screw. In other words, toggle bolt can not be used to the location of stud. NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. NOTE: Holes A, B and C are inside area E. If none of A, B and C is in a stud, find a stud somewhere in area E and draw a forth circle to line up with the stud. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the microwave. Set the mounting plate aside. 10 SMH8165_XAA_DE68-03587A-08_EN.indd 10 11/22/2017 11:40:03 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
10
Step-by-step installation guide
D. ALIGNING THE WALL PLATE
C
L
Draw a Horizontal line on wall from
bottom of “Rear Wall Template˝.
Draw a Vertical Line
on Wall from Center
of Top Cabinet
Horizontal Line
Horizontal Line
Area E
Hole C
Centerline
notches
Hole A
Hole B
CAUTION
: Wear gloves to avoid cutting fingers
on sharp edges.
1
.
Draw a Vertical line on the wall at the center
of the 30˝ wide space.
2
.
Draw a Horizontal line on the wall at the
bottom of “Rear Wall Template”.
3
.
Drill ⅝˝ holes for toggle bolts on 3 locations
(Hole A, Hole B, Hole C) but if the location of
hole is same as that of stud, drill a
3
/
16
˝ hole
for wood screw. In other words, toggle bolt
can not be used to the location of stud.
NOTE: DO NOT MOUNT THE PLATE AT
THIS TIME.
NOTE
: Holes A, B and C are inside area E.
If none of A, B and C is in a stud, find a stud
somewhere in area E and draw a forth circle to
line up with the stud. It is important to use
at
least one wood screw
mounted
firmly in a
stud
to support the weight of the microwave.
Set
the mounting plate aside
.
SMH8165_XAA_DE68-03587A-08_EN.indd
10
11/22/2017
11:40:03 AM