Samsung MX-T40/ZA User Manual - Page 15

•• All SUB units must be connected one by one. For example, after HOST is connected, press GROUP PLAY button on SUB 1 to connect, and after SUB 1 is connected, you should connect SUB 2 and SUB 3 one by one sequentially. •• While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth connection is disabled. •• Bluetooth devices can search and connect with the HOST Sound Tower only. •• When in Group Play mode, the SUBs cannot connect to a Bluetooth device. •• If you power off and then power on the Sound Tower or select any source other than BT on a SUB unit, in Group Play mode, the Group Play mode is disconnected. •• This product does not support aptX audio stream with Wireless Group Play mode. Disconnecting the wireless Group Play mode 1. Press and hold the GROUP PLAY button over 5 seconds (HOST or SUBs) after Group Play is connected or press the GROUP PLAY button (HOST or SUBs) before Group Play is connected. •• "OFF-GROUP PLAY" appears on the display and the LED above the GROUP PLAY button is off. 2. If you select any source other than BT on the SUB units or turn off the HOST Sound Tower, the Group Play mode is disconnected. •• If the disconnection is made from the HOST Sound Tower, Group Play is disconnected. LED Indications LED Green Red STATE Blink Solid Solid Description Waiting for a wireless Group Play connection. The wireless Group Play connection was successful. There is an error with the wireless Group Play connection. NOTE •• In wireless connection, Playback quality can be unstable depending on Bluetooth environment. For better play, please keep the device in wired Group Play mode. ENG - 9