Samsung NP900X3F User Manual Windows 8 Ver.1.8 (English) - Page 65
Using the WOL Wake On LAN function, Control Panel > Network and Internet > Network
View all Samsung NP900X3F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Wired Network 6 Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. Cháaᔪpter 3. Using the computer 64 Ŗᮁ Using the WOL (Wake On LAN) function is a function that activates the system᯲from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). ᰆ⊹ 1 Click Charms menu on the Desktop > Settings > Control Panel > Network and Internet > Netwoᖅᱶrk and Sharing Center and click on Change adapter settings in the left menu pane. When not using DHCP, ask your network administrator for the IP address. 7 When you have completed the settings, click the OK button. The network settings have been completed. 2 Right-click on the Wired Ethernet Connection and select Properties. 3 Click Configure > Power Management tab. Select Allow this device to wake the computer, then click OK. Restart the system. - If the system wakes up from Sleep mode even though there is no received signal, use the system after disabling the function. - Connecting a wired LAN while using a wireless LAN may not activate the function. Set the Wireless LAN to Disable to use the function. - feature may not work while using Hybrid power saving feature. Hybrid sleep mode can be disabled from Power Options under Control Panel.