Samsung NV51K7770SG/AA Installation Guide - Page 12
Installation instructions, Remove Oven Doors
View all Samsung NV51K7770SG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation instructions Replace oven door(s) CAUTION The door is very heavy. You may need help lifting the door high enough to slide it into the hinge slots. Do not lift the door by the handle. A 1. Using two hands, grasp side edges of door at the midpoint. Face the oven cavity. 2. Locate the slots on each side of the oven cavity for the door hinge locks. A. Slot in the oven cavity for door hinge lock 3. At a 45° angle, align door hinges with slots in the lower front of the oven cavity. Slowly insert door, making sure you maintain the 45° angle. You will know the door is engaged in the slot when you feel a slight drop. 4. Lower the oven door to the fully open position. If the oven door does not open to a full 90°, repeat steps 1 through 3. 5. Locate the oven door hinge locks in the corners of the oven door, and rotate the hinge locks toward the oven cavity to the locked position. See Step 1 (illustration A) in the "Remove Oven Door(s)" section for proper locked position. 6. Close the oven door. 7. When the hinges are properly installed and the door closed, there should be an even gap between the door and the control panel. If one side of the oven door is hanging lower than the other, the hinge on that side is not properly installed. 8. Connect Wire Harness. Installation instructions 12 English Install_NW9000K_DG68-00862A-09_EN.indd 12 2019-11-11 5:36:07