Samsung NX58R4311SS User Manual - Page 32

Operating the oven 4. Press the START/SET pad. The oven will automatically light and start preheating. The display will show a blinking •, along with 150° and Bake, until the oven reaches 150°. Then, the display will just show the actual oven temperature. When the oven reaches the desired baking temperature, it will beep 6 times. If your baking results are not what you are used to, the preset oven cooking temperature can be adjusted ±30 °F (±17 °C) as follows: 1. Press and hold the Bake and 0 pads for 3 seconds. The display will show AdJ and 0. 5. Place the food in the oven and close the oven door. Preheating is very important for good baking results. 6. When baking is complete, remove the item(s) from the oven, close the oven door, and press the OVEN OFF pad. The oven will shut off, and the display will show the time of day. To change a programmed baking temperature, press the Bake pad, enter the new baking temperature, and then press the START/SET pad. If the oven temperature is higher than the new setting, the oven will beep 6 times, then show the new setting. The oven will complete cooking at the new temperature. 2. Press the Bake pad to toggle between + or - temperature adjustments. 3. Press the number pads for the desired temperature adjustment for example, (1, 0). The display will show AdJ and 10. 4. Press the START/SET pad. The oven will beep twice, and the display will show the time of day. The next time you bake, the oven will use the new temperature setting. NOTE This adjustment will not affect the broiling or the self-cleaning temperatures. The adjustment will be retained in memory after a power failure. Operating the oven 32 English NX58R4311SS_AA_DG68-01151A-00_EN.indd 32 1/25/2019 11:17:57 AM