Samsung NeXus 50 User Guide - Page 12

FM Frequency. - car

Page 12 highlights

Using Your Player Alone 4. To install the swivel mount, first find a suitable location. The swivel mount's adhesive is very strong and may be difficult to remove. Do not install this mount on leather surfaces and make sure the air temperature is at least 60°F (15˚C). Clean the mounting surface with the surface preparation kit. Peel away the adhesive liner and firmly press the swivel mount to the surface for 30 seconds. Allow 24 hours before using the mount. Using Your Player Alone 5. To install the vent mount, find a horizontal vent that is strong enough to hold your NeXus and its cradle. To remove the vent mount, push it into the vent and lift upwards slightly to release the mount's hooks from the vent vane. ENG You can adjust the tension of the mount with a screwdriver. If you need to remove the mount, carefully lift the adhesive pad with your fingers or a spoon. Warming with a hair dryer for several minutes will help soften the adhesive. 22 Using Your Player Alone 6. Find an unused FM frequency on your car stereo. 7. Set your NeXus to the same FM frequency. (Refer to the section marked "Settings," "FM Frequency.") 8. Tune NeXus to XM channel 1. You should be able to hear XM through your car stereo. Using Your Player Alone 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

5. To install the vent mount, find a horizontal vent that is strong enough to hold your NeXus
and its cradle.To remove the vent mount, push it into the vent and lift upwards slightly to
release the mount’s hooks from the vent vane.
6. Find an unused FM frequency on your car stereo.
7. Set your NeXus to the same FM frequency. (Refer to the section marked “Settings,”
“FM Frequency.”)
8. Tune NeXus to XM channel 1. You should be able to hear XM through your car stereo.
Using Your Player Alone
Using Your Player Alone
23
ENG
4. To install the swivel mount, first find a suitable location.The swivel mount’s adhesive is
very strong and may be difficult to remove. Do not install this mount on leather surfaces
and make sure the air temperature is at least 60°F (15˚C).
Clean the mounting surface with the surface preparation kit. Peel away the adhesive liner
and firmly press the swivel mount to the surface for 30 seconds. Allow 24 hours before
using the mount.
You can adjust the tension of the mount with a screwdriver.
If you need to remove the mount, carefully lift the adhesive pad with your fingers or a
spoon. Warming with a hair dryer for several minutes will help soften the adhesive.
Using Your Player Alone
Using Your Player Alone
22