Samsung PL50A440P1D Quick Guide (easy Manual) (ver.1.0) (English) - Page 3
Storing Channels in Memory, Automatic Method
View all Samsung PL50A440P1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
CONNECTING A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) VIA COMPONENT CABLES 1 2 Audio Cable (Not supplied) Component Cable (Not supplied) 1. Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). Storing Channels in Memory (Automatic Method) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. 2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button. ➢ Air : Air antenna signal. Cable : Cable antenna signal. Auto : Air and Cable antenna signals. T V Channel Antenna : Air ► Auto Program ► Clear Scrambled Channel ► Channel List ► Name ► Fine Tune ► Signal Strength ► Move Enter Return 4 When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ▲ or ▼ to select the correct analog signal cable system source from among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital. ➢ STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. 5 The TV begins memorizing all available stations. ➢ After all the available channels are stored, the TV starts to remove scrambled channels (see page 36 of the owner's manual). The Auto program menu then reappears. ➢ If you want to stop Auto Programming, press the ENTER button. The Stop Auto Program? message will be displayed. Select Yes by pressing the ◄ or ► button. Press the EXIT button to exit. ➢ • All available analog channels are automatically stored in memory. • It takes approximately 3 to 10 minutes to memorize channels. 2