Samsung PN58A550S1F Quick Guide (ENGLISH) - Page 5

Connecting a VCR, Connecting a S-Video

Get Samsung PN58A550S1F PDF manuals and user guides View all Samsung PN58A550S1F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Connecting a VCR VCR Rear Panel TV Rear Panel TV Side Panel Audio Cable (Not supplied) 2 Video Cable (Not supplied) Antenna Cable (Not supplied) 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. 2  Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV. 3 Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2) [R-AUDIOL] jacks on the TV. 4  Press the SOURCE button on the remote control until you see the VCR signal (see "Viewing an External Signal Source" on page 11). ➢ If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables. ➢ Each VCR has a different back panel configuration. ➢ When connecting a VCR, match the color of the connection terminal to the cable. ➢ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). Connecting a S-Video VCR Rear Panel TV Rear Panel  S-Video Cable (Not supplied) 2 Audio Cable (Not supplied) TV Side Panel 1 To begin, follow steps 1 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV. 3 Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV. 4 Press the SOURCE button on the remote control until you see the VCR signal (see "Viewing an External Signal Source" on page ). ➢ An S-Video may be included with your VCR. (If not, check your local electronics store.) ➢ Each VCR has a different back panel configuration. ➢ When connecting a VCR, match the color of the connection terminal to the cable. English - 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
English - 5
1
Unplug the cable or antenna from
the back of the TV.
Connect the cable or antenna to
the ANT IN terminal on the back of
the VCR.
Connect an Antenna Cable between
the ANT OUT terminal on the VCR
and the
ANT IN
terminal on the TV.
2
Connect a Video Cable between the
VIDEO OUT jack on the VCR and
the AV IN 1 [Y/VIDEO] or AV IN 2
[VIDEO] jack on the TV.
3
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN 1 (or AV IN 2) [R-AUDIO-
L] jacks on the TV.
4
Press the
SOURCE
button on
the remote control until you see
the VCR signal (see “Viewing an
External Signal Source” on page
11).
➢
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the
TV. If your VCR is stereo, you must connect two cables.
➢
Each VCR has a different back panel configuration.
➢
When connecting a VCR, match the color of the connection terminal to the cable.
➢
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
Connecting a VCR
1
To begin, follow steps 1 in the
previous section to connect the
antenna or cable to your VCR and
your TV.
2
Connect an S-Video Cable between
the S-VIDEO OUT jack on the VCR
and the AV IN 2 [S-VIDEO] jack on
the TV.
3
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN 2 [R-AUDIO-L] jacks on
the TV.
4
Press the
SOURCE
button on the
remote control until you see the VCR
signal (see “Viewing an External
Signal Source”
on page ±±
).
➢
An S-Video may be included with
your VCR. (If not, check your local
electronics store.)
➢
Each VCR has a different back panel
configuration.
➢
When connecting a VCR, match the
color of the connection terminal to the
cable.
Connecting a S-Video
VCR Rear Panel
TV Side Panel
Video Cable (Not supplied)
Audio Cable
(Not supplied)
VCR Rear Panel
TV Side Panel
S-Video Cable (Not supplied)
Audio Cable (Not supplied)
±
2
±
2
TV Rear Panel
Antenna Cable (Not supplied)
TV Rear Panel