Samsung PN64E8000GF User Manual Ver.1.0 (English) - Page 471
Auto Program, Channel, Program, Cable
View all Samsung PN64E8000GF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 471 highlights
RF (Cable / Antenna) Connection (Troubleshooting) The TV is not receiving all channels. Make sure the coaxial cable is connected securely. Run Auto Program to add available channels to the channel list. Go to Channel → Auto Program then select Cable and make sure to select the correct Cable TV signal type. There are 3 options, STD, HRC and IRC. Most cable systems use STD. Verify the antenna is positioned correctly.
RF (Cable / Antenna) Connection (Troubleshooting)
The TV is not receiving all channels.
Make sure the coaxial cable is connected
securely.
Run
Auto Program
to add available channels
to the channel list. Go to
Channel
→
Auto
Program
then select
Cable
and make sure to
select the correct Cable TV signal type. There
are 3 options,
STD
,
HRC
and
IRC
. Most cable
systems use
STD
.
Verify the antenna is positioned correctly.