Samsung PPM42M6H User Manual (ENGLISH) - Page 28

Setting the MDC (Multiple Display Control) Function Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Move Enter Return Multi Control ID Setup ID Input : 00 : -- Move Enter Return Multi Control ID Setup ID Input : 00 : -- Move Enter Return Multi Control ID Setup : 00 ID Input : -- 0 .. 9: Enter ID Input Number This function enables you to easily control the connected PDP Displays on the PC by specifying IDs to connected PDP Displays. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Multi Control. 5 Press the ENTER ( ) button. Result: The Multi Control menu is displayed with the ID Setup selected. 6 Press the ENTER ( ) button again. Select the ID setup number by using the numeric buttons. Press the ENTER ( ) button. 7 Press the ▲ or ▼ button to select ID Input. Press the ENTER ( ) button. 8 Enter ID input number by using the numeric buttons. 9 Press the EXIT button to exit. ➢ To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When entering the ID Input number of PDP1 while the PDP Display is set in the ID Input mode, only PDP1 is switched to the Menu screen and you can operate the remote control. At this time, PDP2 doesn't operate with the remote control and displays the standby mode of ID Input. ➢ For further details, refer to the MDC program guide. ➢ You can select these options by simply pressing the MDC (Multiple Display Control) button on the remote control. ➢ Refer to the following Web site for information about MDC programs and protocol documents: http://www.samsung.com/support/productsupport/downloa d/index.aspx English - 28