Samsung R4232 Quick Guide (ENGLISH) - Page 15

Storing Channels in Memory 4 Press the ▲ or ▼ button to select the antennas to memorize. Press the ENTER button to select "Start". TV Auto Program Select the antennas to memorize Air Start Cable Start Air + Cable Start 5 In Air, press the ENTER button to start the auto program. In Cable or Air + Cable, press the ENTER button to select the cable system. Press the ▲ or ▼ button to select "Digital Channel or Analog Channel", then select the cable system. Press the ▲ or ▼ button to select "Start" and press the ENTER button to start the auto program. 6 The TV begins memorizing all available stations. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. Note • The TV must be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control. Move Enter Return TV Auto Program Select the cable system. Digital Channel : STD √ Analog Channel : STD √ Start Move Enter Return Auto Program Auto Program in Progress. AIR Channel 67 Stop Enter Return • All available DTV and analog channels are automatically stored in memory when channels are selected by directly accessing channels. • It takes approximately 3 to 10 minutes to memorize channels. Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box, and the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select "Input". TV Input Source List : TV √ ➤ Quick way to access viewing an external signal source : Edit Name Anynet √ √ Just press the "SOURCE" button on the remote control. 2 Press the ENTER button to select "Source List". English-15 Move Enter Return TV Source List TV AV S-Video Component 1 Component 2 PC HDMI Move Enter Return