Samsung RF217ABBP User Manual (user Manual) (ver.0.4) (English) - Page 30

CHANGING THE INTERIOR LIGHTS, Changing the Interior Light in the Refrigerator

Page 30 highlights

Operating your SAMSUNG Refrigerator CHANGING THE INTERIOR LIGHTS Before changing any of interior lights, unplug the Refrigerator from the power supply. If you are unsure CAUTION about changing the lights after reading through these directions, contact a Samsung service center for help. Changing the Interior Light in the Refrigerator 1. Unplug the power cord from the outlet. 2. Pull the shield down while pushing it backwards to remove it. 3. The light bulb may be hot so be careful when touching the bulb. 4. Turn the bulb counterclockwise. 5. Assembly is the reverse order of disassembly. Shield Changing the Interior Light in the Freezer Drawer 1. Unplug the power cord from the outlet. 2. Pull drawer out to full extension. 3. Pull the shield down while pushing it backwards to remove it. 4. The light bulb may be hot. Be careful when touching the bulb. 5. Turn the bulb counterclockwise. 6. Assembly is the reverse order of disassembly. Do not place your fingers inside the cover. The light bulb may be hot. CAUTION 30_ Operating

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

30_
Operating
CHANGING THE INTERIOR LIGHTS
Changing the Interior Light in the Refrigerator
1. Unplug the power cord from the outlet.
2. Pull the shield down while pushing it backwards to remove it.
3. The light bulb may be hot so be careful when touching the bulb.
4. Turn the bulb counterclockwise.
5. Assembly is the reverse order of disassembly.
Before changing any of interior lights, unplug the Refrigerator from the power supply. If you are unsure
about changing the lights after reading through these directions, contact a Samsung service center for
help.
Changing the Interior Light in the Freezer Drawer
1. Unplug the power cord from the outlet.
2. Pull drawer out to full extension.
3. Pull the shield down while pushing it backwards to
remove it.
4. The light bulb may be hot.
Be careful when touching the bulb.
5. Turn the bulb counterclockwise.
6. Assembly is the reverse order of disassembly.
Do not place your fingers inside the cover. The light bulb may be hot.
CAUTION
CAUTION
Operating your SAMSUNG Refrigerator
Shield