Samsung RF220NCTASL User Manual - Page 17

01 SETTING UP Cartridge Holder Clip Filter cartridge Plastic line (Purchased) • You can purchase the necessary filter cartridge at the retailer where you purchased this refrigerator. • Water line must be connected to drinkable water only • When pushing the Refrigerator back, make sure you don't roll over the power cord or water line(Icemaker supply line) To use without the water filter Connecting to the water supply line • Shut o the main water supply line and turn the Ice maker to the o position. • Locate the nearest cold water drinking line. 1. Cold Water line 2. Pipe Clamp. 3. Plastic line 4. Compression Nut 5. Compression Sleeve 6. Packing Nut. 7. Shut Off Valve Connect the water line to the fridge 1. Slip the compression nut through the plastic tubing. 2. After inserting the compression nut into plastic tubing, tighten the compression nut onto 1/4" compression fitting (Purchased). Household water line Copper tubing or Plastic tubing (Not supplied) (Not supplied) Ferrule (Purchased) Plastic Tubing (Purchased) Compression Nut (1/4") (Purchased) Bulb Compression fitting * Compression Nut (1/4") * Refrigerator * Accesory included Do not overtighten the compression nut. • Using Copper Tubing -Slip the compression nut and ferrule on copper tubing as shown. • Using Plastic Tubing -Insert the molded end(Bulb) of the plastic tubing into the compression fitting. Do not use without the molded end(Bulb) of CAUTION the plastic tubing. 3. Tighten the compression nut onto the compression fitting. 4. Turn water on and check for any leakage. • You can purchase the necessary filter cartridge at the retailer where you purchased this refrigerator. • Water line must be connected to drinkable water only. • When pushing the Refrigerator back, make sure you don't roll over the power cord or water line (Icemaker supply line). setting up _17