Samsung RF220NCTASP/AA Quick Guide Easy Manual Ver.0.0 (English, French, Spani - Page 1
Samsung RF220NCTASP/AA Manual
View all Samsung RF220NCTASP/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Before calling service If you have further questions or damaged accessory parts, contact us at 1-800-SAMSUNG (726-7864) 1. Automatic Ice Maker does not work • Allow your refrigerator to operate and cool down for 24 hours (1 full day) before the ice maker starts producing ice. 12 9 3 6 2. Canceling cooling off mode (Freezer/Fridge Temperature Indicator moving) • Cooling off function is for store display, and it makes the refrigerator not to generate cool air. (Only for product sold in U.S) [RF221, RF220] ˝ ˝ [RL225] ˝ ˝ [RL220] ˝ ˝ • In case of Cooling off Mode, refrigerator may seem like working but it does not make cool air. To cancel this mode, press the "Cooling Off Key" at the same time for 3 seconds until "Ding-dong" sounds. COOLING OFF KEY - RF221, RF220, RL225 Model : Ice Off + Freezer Key - RL220 Model : Power Freeze + Freezer Key 3. Water dispenser dripping(On some models) • Turn on water supply and Flush 3 gallons through filter before use (flush approximately 6 minutes) 90 degree 1. Cold Water line 2. Pipe Clamp. 3. Plastic line 4. Compression Nut 5. Compression Sleeve 6. Packing Nut 7. Shut Off Valve 8. Filter Cartridge 9. Cartridge Holder • The water filter must be installed outside the refrigerator. It is not provided with your new refrigerator. The filter cartridge (8) and holder (9) kit can be purchased from the retailer where you purchased this refrigerator. • Do not use copper line. • Cut the tubing, making sure the ends are square and clean. Incorrect Correct There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store. Use Copper Tubing ¼" copper tubing ¼" compression nut (1pc) Ferrule (2pc) Use Plastic Tubing ¼" plastic tubing → Molded end (Bulb) ¼" compression nut (1pc) 4. Fridge or freezer Compartments are warm • Allow your refrigerator to operate and cool down for 24 hours (1 full day) to reach to the set temperature. • Also, when you put room temperature or warmer food into your refrigerator, it may need an additional 24 hours for the fridge to reach the set temperature. 5. Moisture forms on outside/inside of refrigerator • Wipe off the condensation with a dry towel (This may occur during hot and humid seasons.) • If the condensation occurs on the doors, turn off the Energy Saving function. • If you open the doors frequently or for too long, it may cause moisture inside the fridge. 6. Noise Clicks, Pops, Cracks, Snaps • These noises may be heard occasionally inside the refrigerator. This is normal. This sound occurs when various items contract or expand while temperatures are changing; especially during defrosting. This may also occur when electronic devices including the ice maker are operating. 7. Display [RF221, RF220] 1 [RL225] 2 3 4 5 [RL220] ( 1 ) Freezer (Hold 3 sec for Power Freeze) ( 2 ) Fridge ( 3 ) Energy Saver ( 4 ) Ice Off ( 5 ) Alram On/Off ( 6 ) Power Freeze Press the Freezer button to set the freezer temperature between colder and coldest. Press and hold the Freezer button for 3 seconds to activate Power Freezer function which speeds up the freezing process in the freezer. Press the Fridge button to set the Fridge temperature between cold and coldest. For better energy efficiency, press the Energy Saver button. If condensation occurs on the doors, turn the Energy Saver Button function off. If you don't want to make more ice, Press the Ice Off button. The LED will light up and the Ice-Maker stops making ice. Press the Alarm On/Off button to turn the door open alarm on and off. Press this button to activate Power Freezer function which speeds up the freezing process in the freezer. 8. Food stored in refrigerator is frozen • If food with too much moisture is stored near the cooling vents, it may get frozen. Be sure to keep moist food away from the cooling vents. 9. Moving and Installing • When installing, servicing or cleaning behind the refrigerator, be sure of the following: • To protect your floor's finish when moving the refrigerator, cut a large section of the cardboard carton and place under the refrigerator where you are working. • Pull the unit straight out and push back in straight after finishing. 10. Leveling & Door Alignment • Insert a flat-blade screwdriver into a slot on the control lever, turn it clockwise or counterclockwise to level the door. Control Lever Flat-blade screw driver(-) 6 DA68-02659A REV(0.0) ENGLISH %""JOEE 1.