Samsung RF23HCEDBSR User Manual Ver.0.1 (English, French, Spanish) - Page 26
Using the E-SMART Function, Provision for Open Access to the, Connected Product Requirements - ice maker defrost
View all Samsung RF23HCEDBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Using the E-SMART Function The E-SMART function enables you to control and monitor your E-Smart refrigerator remotely for your convenience. To change the time setting for the Delay Defrost Capability You can change the time setting for the Delay Defrost Capability on the app. • To use the E-SMART refrigerator functions, you have to install the corresponding app first. • The app supports indoor control only. 1. Operational Status, User Settings & Messages • You can view the freezer and fridge temperature settings. • You can receive an alarm when the freezer or fridge door is open for 3 minutes. • You can check the DR and Override status. • You can check the operational condition of the ice maker in the freezer. 2. Remote Management • Power Freeze Setting: You can remotely activate the Power Freeze function. • Power Cool Setting: You can remotely activate the Power Cool function. • Ice On/Off Setting: You can remotely set up the Ice On/Off Setting function. You can only control the Ice maker in the Fridge remotely. 3. Energy Consumption Reporting • Shows the accumulated power consumption. Power consumption data is updated every10 minutes. The energy consumption report may differ from the power consumption specifications of the product depending on the operating environment and the stored food. Provision for Open Access to the Connected Product Requirements 1. SGIP Open Standards (Smart Energy Profile 2.0 - http://www.csep.org/) • Energy Consumption Reporting • Demand Response 2. Samsung OPEN API • Operational Status, User Settings & Messages -- ICE Maker Status: GET /external/ icestatus?icegetstatus=opt (relevant to the energy consumption of the product 1) -- Door Open Alarm: GET /devices/0/ Door?type=opt (relevant to the energy consumption of the product 2) -- DR Status: GET /external/drlc?drgetstatus=opt • Delay Defrost Capability -- Set Schedule of the Defrost Delay: POST / devices/0/defrost/addSchedule -- Get Schedule of the Defrost Delay : GET / devices/0/defrost/getSchedule -- Delete Schedule of the Defrost Delay: POST / devices/0/defrost/delSchedule -- Defrost Delay On/OFF: PUT /devices/0/defrost/ delayevent 4. Delay Defrost Capability • The Delay Defrost Capability function saves energy by delaying the defrost operation to a time specified by the user. You can configure the time. and this function will save energy during the specified period in a 24 hour cycle. If the time is not set, the function works with the default time settings. The default time settings are below: -- 6 am to 10 am: 1st. November ~ 30th. April -- 3 pm to 7 pm: 1st. May ~ 31th. October English - 26 DA68-02954A-01.indb 26 14. 2. 17. �� 11:16