Samsung RF261BEAESG User Manual - Page 10

Assemble The Freezer, Drawer, Adjusting The Level, Making Minor Adjustments, Between Doors

Get Samsung RF261BEAESG PDF manuals and user guides View all Samsung RF261BEAESG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

ASSEMBLE THE FREEZER DRAWER To reattach the drawer after you have moved the fridge to its final location, assemble the parts in reverse order. ADJUSTING THE LEVEL Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side. How to adjust the level 1. Open the freezer drawer and remove the lower basket. 2. Insert a flat-blade screwdriver (-) into the notch on the left control lever, and then turn it counter-clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) MAKING MINOR ADJUSTMENTS BETWEEN DOORS Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. Fixed part Adjustment part • The left door is fixed. To make minor adjustments between doors, adjust only the right door. 1. Pull out the freezer drawer ( 1 ), then you can see the lower hinge ( 2 ). 2. Insert a philips screwdriver (+) ( 3 ) into the shaft ( 4 ) of the lower hinge. 3. Adjust the height by turning a philips screwdriver (+) ( 3 ) clockwise ( DOWN ) or counterclockwise ( UP ). • When you turn a philips screwdriver (+) counterclockwise ( UP ), the door will move up. flat-blade screwdriver (-) Control Lever 2 Both control levers must be touching the CAUTION floor to avoid possible personal injury or 4 property damage because of tipping. 1 • If the right side is lower, perform the same procedure, but with the right control lever. 3 3 • It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. 10_ setting up DA68-02601B-14.indb 10 2018. 10. 8. 오후 5:04

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
10_
setting up
ASSEMBLE THE FREEZER
DRAWER
To reattach the drawer after you have moved the
fridge to its final location, assemble the parts in
reverse order.
ADJUSTING THE LEVEL
Make sure the refrigerator is level so that you can
make final adjustments. Use a level to test if the
refrigerator is level both side to side and back to
front. If the refrigerator is not level, it will not be
possible to get the doors perfectly even, which
may cause moisture condensation and increased
energy bills. Below is an example of how to level
the refrigerator if the left side of the refrigerator is
lower than the right side.
How to adjust the level
1.
Open the freezer drawer and remove the lower
basket.
2.
Insert a flat-blade screwdriver (-) into the
notch on the left control lever, and then turn
it counter-clockwise to level the refrigerator.
(You turn the lever clockwise to lower the
refrigerator and counterclockwise to raise it.)
flat-blade screwdriver (-)
Control Lever
Both control levers must be touching the
floor to avoid possible personal injury or
property damage because of tipping.
• If the right side is lower, perform the
same procedure, but with the right
control lever.
• It is difficult to remove the cover leg
front from the refrigerator, so we do not
recommend making small adjustments
with the control lever. Instead, refer to
the next page for the best way to make
minor adjustments to the doors.
CAUTION
MAKING MINOR ADJUSTMENTS
BETWEEN DOORS
Remember, a leveled refrigerator is necessary
for getting the doors perfectly even. If you need
help, review the previous section on leveling the
refrigerator.
Adjustment
part
Fixed part
• The left door is fixed. To make minor
adjustments between doors, adjust only
the right door.
1.
Pull out the freezer drawer (
1
), then you can
see the lower hinge (
2
).
2.
Insert a philips screwdriver (+) (
3
) into the
shaft (
4
) of the lower hinge.
3.
Adjust the height by turning a philips
screwdriver (+) (
3
) clockwise (
DOWN
) or
counterclockwise (
UP
).
• When you turn a philips screwdriver (+)
counterclockwise (
UP
), the door will
move up.
1
2
3
4
3
DA68-02601B-14.indb
10
2018. 10. 8.
오후 5:04