Samsung RF28JBEDBSR User Manual - Page 9
Setting up your French Door, Refrigerator
View all Samsung RF28JBEDBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
setting up Setting up your French Door Refrigerator GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of the Samsung refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers. Selecting the best location for the refrigerator Choose: • A location with easy access to a water supply. • A location without direct exposure to sunlight. • A location with level (or nearly level) flooring. • A location with enough space for the refrigerator doors to open easily. • A location that allows sufficient space to the right, left, back, and top for air circulation. • A location that allows you to move the refrigerator easily if it needs maintenance or service. • Do not install the refrigerator in locations where the temperature is over 110 °F (43 °C) or below 50 °F (10 °C ). If the refrigerator does not have enough space, it can cause the bad influence to refrigeration efficiency and power consumption. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install the refrigerator next to a fixed wall, you need a minimum clearance of 3 ¾" (95 mm) between the refrigerator and wall to allow the door to swing open. Important: Make sure that you can easily move your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. The following chart details the exact height and depth of this Samsung French Door Refrigerator. 29 3/8" (748 mm) 48 1/4" (1226 mm) 53" (1346 mm) B A E C D Model Depth "A" Width "B" Height "C" Overall Height "D" Depth "E" RF28JB** 34" (864 mm) 35 6/8" (908 mm) 68 7/8" (1749 mm) 70" (1777 mm) 36 1/2" (926 mm) 2" (50 mm) 125° 125° 62 1/8" (1578 mm) 13 2/8" (335 mm) 35 6/8" (908 mm) 4 6/8" (122 mm) 2 3/8" (61 mm) English - 9 Each measurement based on the design dimension, so it may differ depending on the measuring method. DA68-02952B-04.indb 9 2016. 3. 30. �� 1:32